Want to Buy WTB: Graflex lensboard

[campy51]

Looking for a good used silver 4x5 crown graphic lens board for the Ektar 152mm lens.

 

🛡️ Classifieds Safety Reminder: Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.

Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.

[nsurit]

Check with SK Grimes in The Boston area. They should be able to get your needs satisfied.

 

[Ian Grant]

Heavy2star on Ebay is your best bet brand new boards for under $16, or less than $13 each if you buy 3. I've bought a few of him over the years, usually 3 at a time.

Ian

 

[campy51]

Heavy2star on Ebay is your best bet brand new boards for under $16, or less than $13 each if you buy 3. I've bought a few of him over the years, usually 3 at a time.

Ian

Did a search for Heavy2star and nothing came up.

 

[Ian Grant]

A quick Google search with just ebay heavy2star and here's the lens boards page

Ian

 

[mmerig]

Looking for a good used silver 4x5 crown graphic lens board for the Ektar 152mm lens.

I have a "silver" board that I am pretty sure is for a 4 by 5 Graphic. it is 3 5/8 inches square, with the rimmed edge. The hole is 1 3/8 inch in diameter. I would be happy to cut a hole in it for you for the 152 mm lens. What size hole do you need?

I would like $5 for the board, plus shipping from 83422, whatever shipping method you prefer.

I'll take a picture of it and post it if necessary, and especially if you are going to buy it of course.

 

[Ian Grant]

That's the right size, and a very fair price.

Ian

 

[campy51]

I have a "silver" board that I am pretty sure is for a 4 by 5 Graphic. it is 3 5/8 inches square, with the rimmed edge. The hole is 1 3/8 inch in diameter. I would be happy to cut a hole in it for you for the 152 mm lens. What size hole do you need?

I would like $5 for the board, plus shipping from 83422, whatever shipping method you prefer.

I'll take a picture of it and post it if necessary, and especially if you are going to buy it of course.

That would be great. The board is 3 5/8 but the opening needs to be 44-46mm or 1 3/4.