Want to Buy WTB Eastman 2D 8x10 Extension Rail

[tlloydau]

Looking for an extension rail for my Eastman 2D. Not fussed about the condition as long as it's functional. Feel free to start a private conversation to discuss.
Cheers

 

[Mark Layne]

Looking for an extension rail for my Eastman 2D. Not fussed about the condition as long as it's functional. Feel free to start a private conversation to discuss.
Cheers

I do have a rail lying around but not sure if it is for a 2D. Will try to send pic later today

 

[tlloydau]

Hi Mark, thanks for the reply. It looks like there were at least two styles of Eastman 2D extension rail. One with a "slotted key" as well as a "bump and groove" connection at the rail ends while the other uses a screwed in key and two rods to align/connect the rails. I have the version which uses the screw and two rods. I believe this is what the compatible rail would look like https://www.worthpoint.com/worthopedia/eastman-kodak-2d-8x10-camera-rear-534532919.

Dimensions of my rail at the end are around 1 1/4 inch by 8 1/2 inch.

 

[Mark Layne]

Hi Mark, thanks for the reply. It looks like there were at least two styles of Eastman 2D extension rail. One with a "slotted key" as well as a "bump and groove" connection at the rail ends while the other uses a screwed in key and two rods to align/connect the rails. I have the version which uses the screw and two rods. I believe this is what the compatible rail would look like https://www.worthpoint.com/worthopedia/eastman-kodak-2d-8x10-camera-rear-534532919.

Dimensions of my rail at the end are around 1 1/4 inch by 8 1/2 inch.

Well it's like the rail I have here is from some other camera. It is a slotted key attachment but it measures 91/2" x 1"
Could send a photo if of interest

 

[tlloydau]

Ah bummer sounds like it's likely not compatible. Thanks for checking though!

 

[tlloydau]

Bump