Why do light meters have such long lanyards? I have a Sekonic and the lanyard is ridiculously long and I’ve noticed any light meter that has its lanyard attached is the same. Is there a reason why I shouldn’t change it to a shorter one?
Why do light meters have long lanyards?
-
A
- Thread starter Sorrycharlie
- Start date
Recent Classifieds
-
Want to Buy Mamiya RZ67 120 film back
- Started by blee1996
-
For Sale Kodak 125PX Plus-X 35mm Film Lot (And More)
- Started by chuckroast
-
For Sale Large format Kodak 1443 Aerochrome color infrared film
- Started by MCB18
-
For Trade FT: My NEW 49mm IR 720 filter for your 52mm IR 720 filter.
- Started by AnselMortensen
-
For Sale FS: Mamiya RB-67 / RZ-67 Caps!
- Started by AnselMortensen
Forum statistics
Haha yes I understand that but I’m 6’3 and it’s past my butt when I hang it around my neck. On a shorter person it would be dragging on the ground almost.
Oh yeah that’s a good idea
Good question. I thought it was so it could hang around your neck and also be able to easily fit into your pants pocket so it’s out of your way and you don’t have to have it swinging around in front of your chest every time you turn around. That’s the only positive purpose I have ever been able to ascribe to it, because, yes, they are ridiculously long if you just let them hang from your neck.My Sekonic rests well below my belt line.
Would love to hear a better/real explanation.
Would love to hear a better/real explanation.
Don't know then. My Sekonic L-758D has a normal length lanyard which hangs mid-torso from my neck (I'm 6'). Was yours bought second hand? Maybe it has an after market lanyard.
The idea behind a long lanyard is to yield lenght for movements of ones arm to make ambient-light meterings at the object.
However none of the meter in my collection has got such lang lanyard.
The one of the Profisix/Mastersix/Lunasix F (all professional meters) is that short that just wearing a T-shirt the meter is at my bellybottom, not much movement possible. In case of wearing a padded jacket, hardly any movement of the meter would be possible.
However none of the meter in my collection has got such lang lanyard.
The one of the Profisix/Mastersix/Lunasix F (all professional meters) is that short that just wearing a T-shirt the meter is at my bellybottom, not much movement possible. In case of wearing a padded jacket, hardly any movement of the meter would be possible.
It's a good question. None of my (Gossen) meter leashes are that long but they are all long enough to be slightly annoying. With my smaller (Gossen Digital) meter , I wear the lanyard around my neck an keep the meter in the shirt pocket. This keep the meter from banging into camera but invariably, the meter lanyard and the camera neck straps get tangled up. I recently replaced the lanyard on one of my larger (Gossen LunaPro SBC) meters with a wrist strap....but I'm not sure that I like this situation either. Alternately, I replaced the neck strap on one of my smaller, lighter cameras with a wrist leash and added a sturdy grip to the camera.
I'd like to be able to keep the camera and the meter on some kind of leash with out them banging into each other while I'm walking and not using either of them.
I'd like to be able to keep the camera and the meter on some kind of leash with out them banging into each other while I'm walking and not using either of them.
So it doesn;t bang against your camera that's got a shorter neck lanyard.?
Better too long a lanyard than too short! 
When I was a Boy Scout we made lanyards out of gimp, a plastic coated "ribbon" about 1/8 inch wide. These lanyards featured a "collar" which allowed adjusting the length. How about one in Pentax red and black for a Spotmeter? I'll have to look up the instructions.....They're on the web, of course!
When I was a Boy Scout we made lanyards out of gimp, a plastic coated "ribbon" about 1/8 inch wide. These lanyards featured a "collar" which allowed adjusting the length. How about one in Pentax red and black for a Spotmeter? I'll have to look up the instructions.....They're on the web, of course!
I tie a knot in the lanyard. Having buckles that drag on the ground is enough for me.
My Pentax Digital Spot Meter had a wrist strap and fits in a holster.
Last edited:
(Well I just had to look ... 
) My currently used meters are a Gossen Digisix and a Sekonic L-508. Both have lanyards about 17 inches/47 cm which doesn't drop them all that far. In fact it can be a PITA when trying to do incident metering in some situations. For those who are short (or have tiny necks 
) the L-508 has a spring-loaded gizmo that allows shortening its effective length. The Sekonic also came with a fitted belt holster.
) My currently used meters are a Gossen Digisix and a Sekonic L-508. Both have lanyards about 17 inches/47 cm which doesn't drop them all that far. In fact it can be a PITA when trying to do incident metering in some situations. For those who are short (or have tiny necks ) the L-508 has a spring-loaded gizmo that allows shortening its effective length. The Sekonic also came with a fitted belt holster.
Andrew O'Neill
Moderator
The lanyard on my Minolta spot metre is not so long. It goes around my neck, and metre slips in breast pocket. So, if yours is too long, just tie it shorter.
Thanks for the replies everyone. I’d say from the above suggestions from agx and Larry, that the reason must just be it can be easily placed in your pants pocket while also still being attached to your neck and to also allow plenty of length to take incident light readings.
If you were leaning to take a reading against someone’s face you wouldn’t want to be bringing your own head in close to there’s and you also wouldn’t want to have to take it off your neck so this makes sense.
The lanyard I have is not aftermarket, it has Sekonic printed all over it and it is the original.
If you were leaning to take a reading against someone’s face you wouldn’t want to be bringing your own head in close to there’s and you also wouldn’t want to have to take it off your neck so this makes sense.
The lanyard I have is not aftermarket, it has Sekonic printed all over it and it is the original.
Buckles or knuckles?
Long lanyard to reach the case that is supposed to be on your belt, hence the "belt loops" on the case. It keeps your meter safe and out of the way until needed , and still attached to you so it doesn't get lost or dropped.
A long lanyard allows one to lower the meter gently into ones pack on the ground without having to bend over or drop it in.
Never wear the meter around my neck but if I do I think it would be a problem regardless of how long the landyard is. If it's short that it hang around my chest then I can't make a measurement at arm length which I do often with incident metering. If it's long enough to hold the meter at arm length then it would hang at least around my belly and that would sling around too much.
If you have a jacket with adjustable waist straps they may have a spring loaded clamp on the cord.
You could get one for your cord and still have full length and adjustability.
Joann fabrics carries a few.
You could get one for your cord and still have full length and adjustability.
Joann fabrics carries a few.
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |