what waS your last photography related purchase?

Kino · Mar 15, 2020

Donald Qualls said:
A leather stitching kit, direct from China. Yes, this is photo related -- I've got a Daiichi Zenobia 6x4.5 folder that has no strap lugs on the camera, and the stitching has failed in the leather case that's the only means of carrying the camera around. Got one or two other old leather cased cameras as well, and others might find their way here at some point -- this tool set will let me repair them, as long as the leather is in good condition and it's only the thread that's gone.

I am sure you know this but avoid the traditional leather sewing needles with fragile leather cases and use thin upholstery needles or such. I tried using the large needles and it just destroys the old leather, even after treating it for an extended period of time.

R.Gould · Mar 15, 2020

Minolta 600si classic. A camera I have long wanted, but thef rarely seem to come up for sale,

logan2z · Mar 15, 2020

Beseler 8072 AN glass negative carrier. I resisted for a long time since it's ridiculously expensive for what it is, but I think it will prove very useful for printing MF negatives.

abruzzi · Mar 15, 2020

A Fuji GA645Zi. I needed a good travel camera, we’ll see how this does, or if the automation frustrates me.

Donald Qualls · Mar 15, 2020

Kino said:
I am sure you know this but avoid the traditional leather sewing needles with fragile leather cases and use thin upholstery needles or such. I tried using the large needles and it just destroys the old leather, even after treating it for an extended period of time.

The kit I bought has some fairly fine needles. Furthermore, this leather is in quite good condition, it's only the thread that's failed (I think it was originally cotton). I'd certainly avoid forcing anything, though.

flatulent1 · Mar 15, 2020

A Ryobi P738 Inflator. I got tired of the rubber puffers, and hair dryers are just too big. If you're already in the Ryobi 18v One+ system, this should be a no-brainer. So naturally it took me several years to figure it out...

Luis-F-S · Mar 15, 2020

Voigtlander SW-Heliar 15mm for my M-6

miha · Mar 16, 2020

50 12''x16'' sheets of ADOX VARIO CLASSIC (EFKE VARYCON).

Dennis-B · Mar 17, 2020

Couldn't resist this for the price. Mint condition Tokina 500mm f/8 RMC mirror lens. Thought I'd try this one out on my Nikon film cams.

Ian Grant · Mar 18, 2020

Three litres of IPA (Isopropyl alcohol) to make more French polish, and it has the additional advantage of being hand sanitiser, as it's 99.9% alcohol I can dilute it slightly.

Ian

Donald Qualls · Mar 19, 2020

Sigh. I did it.

Bought a Kiev 4A with a Jupiter 8 f/2 53 mm lens. Seller says everything works right; I'll know in a few weeks, after it makes its way from Russia.

Peter Schrager · Mar 19, 2020

TheFlyingCamera said:
Some of the CatLabs ISO 80 film in 120, 4x5 and 8x10 to try out.

Please report back!!

removed account4 · Mar 19, 2020

jnantz said:
some sweet sweet dektol

sadly its brown / bad . hate when that happens!

jtk · Mar 19, 2020

jnantz said:
a nikon d300 from a wonderful seller on this forum, 25lbs of terra cotta air dry clay, and some tubes of watercolor paint

How will you use the clay?

miha · Mar 20, 2020

jnantz said:
sadly its brown / bad . hate when that happens!

Freshly mixed and brown?

TheFlyingCamera · Mar 20, 2020

Peter Schrager said:
Please report back!!

I'm going to get out this weekend and give it a try. Going to play with it using my Hermagis Eidoscope (that lens is the reason I bought this stuff- I need something slow enough that I can time exposures with a lens cap/darkslide/etc).

Luis-F-S · Mar 20, 2020

3 boxes of Fuji 810 X-Ray film.

Jason Berge · Mar 20, 2020

5 boxes of 4x5 Kodak film.

2 x T-Max 100 25 sheet
2 x T-Max 400 25 sheet
1 x Technical Pan 25 sheet

Bought as a lot off good old eBay.

Oh and a Godox V1 flash for my DSLR, Best value flash I have ever bought, HSS and FEC in TTL, completely idiot proof (that's me) and kills the Profoto A1 at 20% of the price.

removed account4 · Mar 20, 2020

jtk said:
How will you use the clay?

I was going to brush cyanotype chemistry on the tiles until I learned from the manufacturer that
the clay would not do well being rinsed . sadly I don't have a kiln
I rolled clay into a pair of 8"(?) tubes and put a meniscus lens on one end in a barrel and stick a crumpled ball of photo paper in there ( it doesn't get wet so it's OK )

miha said:
Freshly mixed and brown?

yeah its not looking good ! <attached photo of it when I added the brown powder to water >

any experience with dektol that looks like milk chocolate ?
I've attempted to contact the person I purchased from to learn of his experiences
with brown dektol but my attempts have not been successful. sadly I bought a bunch of it...

darkosaric · Mar 21, 2020

Just got 3x0.5 liter of Adox Fixer concentrate. Now I am all set up for printing my huge backlog, it looks like we will all stay at home more than we want, because of the situation in the world. When one cannot go out and shoot, one can go in the basement and print. Always look on the bright side of life .

Horatio · Mar 21, 2020

Ordered a shutter release cable for my Bronica SQ.

abruzzi · Mar 22, 2020

Six rolls of Adox CMS II 20, and a bottle of adotech developer (that should develop six rolls)
More Xtol
Some new graduated cylinders, negative sleeves, binders, and other miscellaneous boring but necessary stuff.

Donald Qualls · Mar 25, 2020

Ordered an accessory shoe viewfinder for my Kiev 4M (I called it a 4A above, but the meter version is a 4M). Partly in anticipation of adding lenses, partly in (now dispelled) concern I wouldn't be able to see the full frame through the viewfinder with my glasses. Only cost a couple bucks more than the camera did...

R.Gould · Mar 25, 2020

Ordered 30 rolls of Fomapan 400, 15 35mm an 15 120,

W_Taylor76 · Mar 25, 2020

5 rolls of Bergger Pancro400 and more developer (both Rodinal and Ilford Ilfotec DD-X)

what waS your last photography related purchase?

Membership Council

Privacy & Transparency

Privacy & Transparency