Waterproof Labels for Glass Bottles

Old-N-Feeble

Member
Joined
Feb 22, 2012
Messages
6,805
Location
South Texas
Format
Multi Format
How are you folks labeling your glass chemical bottles? I want something waterproof and preferably stain resistant. I suppose one could etch or grind markings onto the glass but I'm looking for something easier. I do have a Dremel tool, BTW.
 

Ken Nadvornick

Member
Joined
Mar 18, 2005
Messages
4,942
Location
Monroe, WA, USA
Format
Multi Format
Ordinary pressure-sensitive vinyl electrical tape, white, written using a black Sharpie.

Easily visible. Never smears. Never deteriorates. Stays attached even in hot water. Peels off clean. Cheap. Readily available. Offered in other non-white colors if desired.

Ken
 
Last edited by a moderator:

BrianShaw

Member
Joined
Nov 30, 2005
Messages
16,523
Location
La-la-land
Format
Multi Format
Duct tape and Sharpie. For both glass and plastic.
 
OP
OP

Old-N-Feeble

Member
Joined
Feb 22, 2012
Messages
6,805
Location
South Texas
Format
Multi Format
Heh... it seems I'm trying to make this more complicated than it really is.

Long ago I used masking tape and an ink pen but the tape always eventually got stained and I had to remove them with a razor blade once they became difficult to read.
 

BrianShaw

Member
Joined
Nov 30, 2005
Messages
16,523
Location
La-la-land
Format
Multi Format
Umm... replacing the label takes about 1 minute. Can easily be done before it gets too stained and unreadable. :confused:
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
Write directly on the glass with a marker. When you want to clean it off, alcohol or acetone will do the trick. Of course this will not work with brown bottles, but it is rare that you need a brown bottle.

PE
 
OP
OP

Old-N-Feeble

Member
Joined
Feb 22, 2012
Messages
6,805
Location
South Texas
Format
Multi Format
Thanks folks. I bought all amber glass bottles because I thought it best. They're already bought and paid for. Live and learn, I guess.
 
OP
OP

Old-N-Feeble

Member
Joined
Feb 22, 2012
Messages
6,805
Location
South Texas
Format
Multi Format
White duct tape, it is!!
 

Gerald C Koch

Member
Joined
Jul 12, 2010
Messages
8,131
Location
Southern USA
Format
Multi Format
For glass bottles that are already labeled apply a thin coating of hot paraffin with a brush. Afterwards the paraffin and label are easily removed with a razor blade. This is what we always did in the lab. The coating is impervious to strong acids and bases. Blocks of paraffin are available from stores that sell canning supplies.
 

bdial

Subscriber
Joined
Jan 2, 2005
Messages
7,465
Location
North East U.S.
Format
Multi Format
I use blue masking tape and a Sharpy. Peels off easily when I want it to, stays on with no issues until then.
 

David A. Goldfarb

Moderator
Moderator
Joined
Sep 7, 2002
Messages
19,974
Location
Honolulu, HI
Format
Large Format
I write on my brown glass bottles with silver Sharpie.

 
OP
OP

Old-N-Feeble

Member
Joined
Feb 22, 2012
Messages
6,805
Location
South Texas
Format
Multi Format
David, do you have any issues with that wearing or flaking off?

cowanw, same question.
 

David A. Goldfarb

Moderator
Moderator
Joined
Sep 7, 2002
Messages
19,974
Location
Honolulu, HI
Format
Large Format
Wears a bit over time, but holds up pretty well.
 

kb3lms

Member
Joined
Jun 24, 2006
Messages
1,004
Location
Reading, PA
Format
35mm
My writing is too sloppy so I like to print labels on paper from my computer and then affix them to the bottles with clear packing tape.
I can also make the printing any size I like, colors, or pictures.
 

Rick Jones

Member
Joined
Feb 9, 2004
Messages
127
Location
Maryland
Format
Multi Format
Johnson&Johnson First Aid Waterproof Tape 1" X 5 yards (previously KA adhesive tape). Cutoff what you need and mark with ballpoint pen.
 

Bill Burk

Subscriber
Joined
Feb 9, 2010
Messages
9,301
Format
4x5 Format
The silver ink looks great.

I think the first aid tape is probably best / most accessible.

But I thought I'd add: "Dymo" labels "pop" off but they look great.

Those "Brother" labels that replaced "Dymo" would probably serve.

But I think "gummed" paper labels would be classic, especially if they had the orange outline with scalloped corners.
 

walbergb

Member
Joined
Sep 19, 2005
Messages
429
Location
Brandon, Man
Format
Multi Format
I print paper labels, then use clear, 2" wide packing tape to cover. Labels are 1" . That leaves 1/2" top & bottom for overlap to seal the paper. Rarely do I have to replace the label. Use it on brown glass bottles and both brown & clear plastic bottles. Cheap and effective.

Once upon a time I had access to a manual laminating machine. That really sealed the paper labels . Still used packing tape to apply to the bottle.
 

walbergb

Member
Joined
Sep 19, 2005
Messages
429
Location
Brandon, Man
Format
Multi Format
Old-N-Feeble said:
Thanks folks. I bought all amber glass bottles because I thought it best. They're already bought and paid for. Live and learn, I guess.
Click to expand...

Not to worry. Brown glass bottles are best for storing developers & bleaches, both of which are sensitive to light.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…