Want to Buy Want to buy 86mm filters

Sirius Glass · Dec 30, 2015

I am looking for 86mm filters with enough threads on the front portion to screw in a lens hood with the same thread.

Skylight KR1.5
Yellow
Orange
Red

Sirius Glass · Dec 30, 2015

Unfortunately that will be a little too small.

Nokton48 · Dec 30, 2015

The Hasselblad 86's are nice. That is what I use.

http://www.ebay.com/itm/Hasselblad-...486187?hash=item3f597fc82b:g:q54AAOSwLqFV9K1R

Nokton48 · Jan 2, 2016

I just picked up one (the UV) on ebay for $35, that's more like it. To use on my Zeiss 180mm Sonnar.
Zeiss filter on Zeiss lens.

Sirius Glass · Jan 2, 2016

The photographs on eBay and most photo stores are not detailed enough to see whether or not the lens hood will screw on. I sent a question about the threads and thread depth on a group of filters that were being offered on eBay. This is the response that I got.

If you want the 'Nature 86mm Orange Panchromatic Filter' I can give you a discount.

Not responsive. The last thing I want is to have to return the filters to China.

Nokton48 · Jan 3, 2016

Yes the Hasselblad Zeiss filters are deeply threaded and I've used all kinds of 86mm hoods on the front of them.
East German CZJ hoods for the P6 lenses, rubber hoods all fit without any problems. Even the 350/500 Hassy CT* Hood. I just ordered a new 86mm rubber hood from B&H to go on the Hasselblad filter I just purchased on Ebay. $10.95

trdelectronics · Jan 6, 2016

If you really looking something like that, just type TRD Electronics dot co dot uk in the url Bar. You will see more and more options over there.

Sirius Glass · Jan 6, 2016

trdelectronics said:
If you really looking something like that, just type TRD Electronics dot co dot uk in the url Bar. You will see more and more options over there.

Welcome to APUG

I tried it and it only showed four choices and none of them what I want. Is there a way to do any better?

Sirius Glass · Jan 18, 2016

Updated: I am looking for a Skylight KR1.5 86mm filter with enough threads on the front portion to screw in a lens hood with the same thread.

Sirius Glass · Jan 24, 2016

I want to be able to attach the lens hood to the filter or to be able to store the filters in a stack.

coa_lund · Jan 25, 2016

For 86 mm filters there are different threads: Hasselblad Tele-Tessar 500 and 350 use 86x1 mm, and older Symmar 300 mm also use this size. Unfortunately, newer lenses seem to use 86x0.5 mm
Carl

Sirius Glass · Jan 25, 2016

That must be why I see listings with coarse thread and fine thread. I asked KEH about which I needed for the Hasselblad Tele-Tessar 350 and 500 and they could not find it in their documentation. Thank you.

GRHazelton · Jan 25, 2016

Check with these folks: http://www.filterfind.net/Home.html They have a good range, most are used but they grade conservatively.

aoresteen · Jan 25, 2016

Which thread pitch? 86mm come in .75mm and 1.0 mm pitches.

Sirius Glass · Jan 27, 2016

AgX · Jan 27, 2016

Best you ask at the manufacturers (lens/filter).
Heliopan for instance state the pitch, which is 1mm for their 86mm filters. But likely they would machine you another pitch if needed.

Sirius Glass · Jan 27, 2016

The B+W filter would not allow the lens hood to screw into it so I had to return it to KEH.

AgX · Jan 27, 2016

Problem is that in contrast to the filters of the 70s or so now there are "slim-line" filters and all got complicated.
B+W offer a 86x1 filter plus 105x1 front thread.

Sirius Glass · Jan 30, 2016

Want to Buy Want to buy 86mm filters

Privacy & Transparency

Privacy & Transparency