Has anyone tried W2D2+ with tank development? What were the results? Thanks!
W2D2+ tank development?
-
A
- Thread starter athanasius80
- Start date
Recent Classifieds
-
For Sale FS: Japanese Wooden 4x5 Field Camera
- Started by B.S.Kumar
-
For Sale Portra 160NC minox, 2x3 2422, 4x5 Aviphot 200
- Started by MCB18
-
For Sale Toyo View 810MII
- Started by Jammoh
-
For Sale Cambo Wide 650
- Started by RoboRepublic
-
Sold Fotoman Optical Viewfinder 6x12/6x9/6x8/6x7/6x4.5
- Started by RoboRepublic
Forum statistics
- Joined
- Nov 21, 2004
- Messages
- 2,415
- Format
- Multi Format
Yes, I've done this. You are referring to Formulary's version? My results were very nice. Of course, this depends on what film you wish to use WD2D+ with, but I used it mainly with APX 400.
I used 1/2 tsp of sod. carb/liter of water (I used tap thru the whole process, even tho' the dev. calls for distilled) as a presoak and found that 10 min. was fine for APX 400. The instructions call for 11 min.
As with any new dev., and perhaps especially so with a pyro dev., test rolls are advised.
WD2D+ is a dev I'll be buying again.
I used 1/2 tsp of sod. carb/liter of water (I used tap thru the whole process, even tho' the dev. calls for distilled) as a presoak and found that 10 min. was fine for APX 400. The instructions call for 11 min.
As with any new dev., and perhaps especially so with a pyro dev., test rolls are advised.
WD2D+ is a dev I'll be buying again.
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |