Using Expert drums in early JOBO's

Heads in a freezer

A
Heads in a freezer

  • 3
  • 0
  • 846
Route 45 (Abandoned)

A
Route 45 (Abandoned)

  • 1
  • 0
  • 961
Sonatas XII-48 (Life)

A
Sonatas XII-48 (Life)

  • 2
  • 3
  • 1K
Waldsterben

D
Waldsterben

  • 2
  • 0
  • 2K
Microbus

H
Microbus

  • 3
  • 1
  • 3K

Recent Classifieds

Forum statistics

Threads
199,684
Messages
2,795,305
Members
100,000
Latest member
st1
Recent bookmarks
0

rick durbin

Member
Joined
Oct 19, 2003
Messages
6
JOBO's website says that they've made three upgrades to the CPP-2 processor to better handle the heavier expert drums, starting with serial numbers 10,594, 20,456 and 22,000. I want to buy a used processor for 4 x 5, preferably using the 3010 drum, but am concerned whether one of the early versions of the processor in good shape would be able to handle the load. What's been your experience? Thanks. Rick Durbin
 

galyons

Member
Joined
May 27, 2003
Messages
276
Location
San Francisc
As you saw on the Jobo site, both the motor and the circuitry were beefed up to handle the extra weight and drag expert drums. The older units, 2nd generation better than first, will turn the expert drums, but the motor will wear much more quickly. Bear in mind that the older units are older, so it is fair to assume they have more usage. Especially if they served some or all of the lives in a lab. The upgrade runs, (ran?). about $800.

I have used the expert drums on some older units. some were fine, others noticably lugged. If your plans are to use expert drums fairly frequently, you are probably better off holding out for a newer unit with the beefier internals.

Cheers,
Geary

JOBO's website says that they've made three upgrades to the CPP-2 processor to better handle the heavier expert drums, starting with serial numbers 10,594, 20,456 and 22,000. I want to buy a used processor for 4 x 5, preferably using the 3010 drum, but am concerned whether one of the early versions of the processor in good shape would be able to handle the load. What's been your experience? Thanks. Rick Durbin
 

Loose Gravel

Member
Joined
Feb 28, 2003
Messages
964
Location
Santa Barbar
A friend burned out the motor in his early Jobo with the expert 5x7 drum. Do be careful. If you don't need all the bells and whistles of the Jobo base, consider a rotary base from someone else or the manual roller from Jobo.
 

Byron Worthen

Member
Joined
May 17, 2006
Messages
30
Format
4x5 Format
I bought a used (very early model) JOBO CPP2 a few years ago. When I got a lift kit and expert drums, I found that the original motor didn't have enough grunt. I got the motor upgrade kit and did the upgrade myself. Now, the way I see it, I would have saved money in the long run by buying a brand new JOBO instead of a used one.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom