ULF SPECIALIST FILM MANUFACTURE 2017

Harman Tech Service · Apr 5, 2017

For info, we have just released details of the 2017 ULF film run.

Full details can be found here: http://www.ilfordphoto.com/products/page.asp?n=137

Press release can be found here: http://www.ilfordphoto.com/pressroom/article.asp?n=218

Kind regards,

Neil

GregW · Apr 5, 2017

Thanks Neil for doing this again this year. One bit of feedback, The 9cm x 50ft roll on sheet film stock prevents any use as a reload for out of date roll film formats. It is also too thick to be slit down easily. I'd buy several rolls if this was on roll film stock instead.

Harman Tech Service · Apr 6, 2017

GregW said:
Thanks Neil for doing this again this year. One bit of feedback, The 9cm x 50ft roll on sheet film stock prevents any use as a reload for out of date roll film formats. It is also too thick to be slit down easily. I'd buy several rolls if this was on roll film stock instead.

Thanks for the feedback Greg, I'm not sure of the requirement for the original item. I seem to remember this being raised before though. Perhaps we have two separate requirements here. Roll and sheet film stock ?

GregW · Apr 6, 2017

Thanks Neil, Not sure what you mean? Are you saying one can specify roll film stock when ordering it?

mgb74 · Apr 6, 2017

Just so users of "miniature" cameras don't feel left out, I see the program includes 2.25 x 3.25 and 3.25 x 4.25 sheets of FP4 and HP5.

Harman Tech Service · Apr 21, 2017

GregW said:
Thanks Neil, Not sure what you mean? Are you saying one can specify roll film stock when ordering it?

Hi Greg, What I was meaning was that I was unsure as to the original requirement for this size and base type, presumably this was due to specific requirement(s) in previous years. I will feed this back to the people who organise the ULF campaign.

Bob Carnie · Apr 21, 2017

I am a happy camper place my order for Ortho 25 in large rolls, really happy .

BAC1967 · Apr 21, 2017

I got the HP5+ in 127 format last year so I was hoping for something else in that format this year like maybe Delta 100. I'm still working through my HP5+ so I won't need more of it for a while.

TheToadMen · Apr 21, 2017

Richard.L said:
@Harman Tech Service // is it true that ortho+ will only be made every other year?

Yes, see: (there was a url link here which no longer exists)

Lachlan Young · Apr 21, 2017

Richard.L said:
@Harman Tech Service // is it true that ortho+ will only be made every other year?

It's being made whenever stock drops below a certain level & relative to its keeping properties and projected demand, that might be every 2 years. I think Galerie might be on an annual or 18 month schedule & I'm fine with that if that's what it takes to ensure the future of those specialist products.

TheToadMen · Apr 21, 2017

Lachlan Young said:
It's being made whenever stock drops below a certain level & relative to its keeping properties and projected demand, that might be every 2 years. I think Galerie might be on an annual or 18 month schedule & I'm fine with that if that's what it takes to ensure the future of those specialist products.

Ilford said: "These films will only be manufactured again in 2019."

Agulliver · May 18, 2017

mgb74 said:
Just so users of "miniature" cameras don't feel left out, I see the program includes 2.25 x 3.25 and 3.25 x 4.25 sheets of FP4 and HP5.

Ooh 3.25x4.25 is potentially of interest to me And those emulsions were exactly what I was hoping for!

hired goon · May 31, 2017

Harman Tech Service said:
Thanks for the feedback Greg, I'm not sure of the requirement for the original item. I seem to remember this being raised before though. Perhaps we have two separate requirements here. Roll and sheet film stock ?

I would have ordered this this year had it been on roll film base. In a previous year I ordered it not realizing it was on sheet film base.

Also, is there a reason why none of these offerings are PanF 50? I find that with many of the items I've personally ordered in the past from this ULF program are HP5+, which is faster film than I prefer using in these old cameras. For instance, the 70mm unperfed 50' rolls, I'd much prefer to buy in FP4, or even preferably PanF. As well as the 8" Cirkut 100' roll. This is available only in HP5, and I'd really prefer it with something slower. Is it possible to request items to appear in following year? I know I did that once before, but is it possible now? I have a few items I'd love to see, and buy.

Meyer Trioplan · Jun 1, 2017

I want to echo what hired goon above said - HP5 is an excellent film, but exposure setting ability on many older cameras that use this specialty size film are more conducive to a slower film like FP4 or even Delta 100. Is it possible that future ULF runs could alternate wherein sizes offered on only one film stock each year rotate between FP4 and HP5?

That said, I did order a roll of 46mm film from Freestyle to stock my 127 cameras. When and how would I expect word to arrive that the order thresholds for this group were met and my order was included?

hired goon · Jun 7, 2017

My experience with ULF order thresholds is that if quantity is not reached, you will be notified by your dealer very shortly after the deadline. Whereby they will most likely ask you if you'd like to increase your order in an effort to hit the threshold. When this happened to me, the dealer knew exactly how many additional rolls were needed.

It's a great ULF program in many ways, but terribly kludgy ordering system. If they could tie it into their website somehow, so we knew how many orders for a certain film were needed to hit the threshold, I may actually get film I've been trying to for 4 years.

ULF SPECIALIST FILM MANUFACTURE 2017

Harman Tech Service

Partner

GregW

Harman Tech Service

Partner

GregW

mgb74

Harman Tech Service

Partner

Bob Carnie

BAC1967

TheToadMen

Lachlan Young

TheToadMen

Agulliver

hired goon

Meyer Trioplan

hired goon

ULF SPECIALIST FILM MANUFACTURE 2017

Partner

Partner

Partner

Privacy & Transparency

Privacy & Transparency