UK Print Exchange Round Three

[Leon]

Received a beautiful print of a Swaledale waterfall from Leon yesterday. Many thanks, mate!

glad you liked it

 

[Brian Jeffery]

Hi all,

I received a very handsome print off Mark Tweedie a couple of weeks back (would've have posted this earlier if I new it was the done thing ). The print is great, I really liked the quality. FB Multigrade definitely seems to produce superior results to the resin coated variety. I'll have to give a box a try some time. If it wasn't for the damn long wash time...


Brian

 

[marktweedie]

Hi all,

I received a very handsome print off Mark Tweedie a couple of weeks back (would've have posted this earlier if I new it was the done thing ). The print is great, I really liked the quality. FB Multigrade definitely seems to produce superior results to the resin coated variety. I'll have to give a box a try some time. If it wasn't for the damn long wash time...


Brian

Thanks for the compliment Brian. Once you try FB there is no going back! The long wash times are a small price to pay.

Mark

 

[Brian Jeffery]

Hi,
Received jeffeb's print Friday. The image is a classic style London street scene and very-well seen, the print it's self is printed to high standard Thanks very much Brian.
Regards JON

Thanks Jon, your feedback is appreciated. I'll let you know who the statue portrays when my Dad develops his roll of film which has a picture of plaque on it.


Brian

 

[Brian Jeffery]

Once you try FB there is no going back!
Mark

I have some Ilfobrom Gallerie (only a few sheets) - cracking stuff, but a little bit on the expensive side. A box of FB Multigrade seems to be about the same cost as a box of portfolio, but considerably superior (IMO).


Brian

 

[wiseowl]

My print is packed and ready to go. Should get it in the post tomorrow.

Cheers

Martin

 

[Leon]

Just a reminder that there are only 10 days to go before round four is due to start. So far, I have only had confirmation of 5 prints being received - that leaves 11 more.

If you are having difficulties in getting your prints out in this timeframe, please let me know via pm or on this thread

 

[Ailsa]

Received Jon Butler's lovely print a few days ago. Very impressed Jon - I'm sure it'll make a great series.

My own print will go out at the weekend...

 

[zinzin]

Print left on Friday... bit late but I made.... uuuuf... darkroom and small babies are not easy to look after at the same time...

 

[Bob F.]

Print left on Friday... <snip>

And received in perfect condition this morning. Cheers: very atmospheric.

Mine is in the press along with a couple of its siblings (I've tried since Friday to flatten the s*dding things but my usual method is not working: no idea why)... Regardless, flat or not, I'll send it out tomorrow morning!

Cheers, Bob.

 

[Dave Miller]

And received in perfect condition this morning. Cheers: very atmospheric.

Mine is in the press along with a couple of its siblings (I've tried since Friday to flatten the s*dding things but my usual method is not working: no idea why)... Regardless, flat or not, I'll send it out tomorrow morning!

Cheers, Bob.

If all else fails may I recommend a hot steam iron set to cotton; unless it's mine in which case I will accept the wrinkles.

 

[Bob F.]

If all else fails may I recommend a hot steam iron set to cotton; unless it's mine in which case I will accept the wrinkles.

If all else fails I might well try that... Not actually wrinkled or anything: they all just have their original curve as they came out the box. Very odd, as I normally have no problem flattening MGIV Warmtone - ho hum...

Oh yeah, sorry, it's not for you Dave, though you are certainly welcome to a copy.

Cheers, Bob.

 

[Dave Miller]

If all else fails I might well try that... Not actually wrinkled or anything: they all just have their original curve as they came out the box. Very odd, as I normally have no problem flattening MGIV Warmtone - ho hum...

Oh yeah, sorry, it's not for you Dave, though you are certainly welcome to a copy.

Cheers, Bob.

Well that's o.k. then; it's full steam ahead.

Trying to be serious for a moment (difficult), are you letting the print cool before taking it out of the press? I find that when I don't do that they take up a curve.

 

[Bob F.]

The method I use is largely what was suggested to me a year or so ago by Nancy Gutrich here on APUG. Has worked very well since.

I put the print in the press between two sheets of mountboard and heat it for a few minutes. I then take the print out, fan it about a bit and repeat a couple of more times. The theory here is that this removes any residual moisture from the print. I then put it back in the press with a sheet of release paper against the emulsion under pressure for about 5 minutes. I then switch the press off and release some of the pressure so it is still held flat, but not pressed hard, and leave the print in there overnight. Usually comes out flat enough to corner mount.

I think it is sorted as I've had it in the press all day and just packaged it up to send out and it was pretty flat. May have been the rain/sun/rain/sun weather we are having down here at the mo. - or just me having one of those days... Be interesting to see if a couple of days held flat in a cardboard mailer going through the post will help (or not...).

Cheers, Bob.

 

[FrankB]

My apologies to my recipient and the organisers. I am (yet again) running late. I'm at a conference this week and snowed under, but I hope to get a print in the post on Friday morning.

Abject apologies to all, especially after the early arrival of a superb print from this round's organiser.

 

[Leon]

My apologies to my recipient and the organisers. I am (yet again) running late. I'm at a conference this week and snowed under, but I hope to get a print in the post on Friday morning.

Abject apologies to all, especially after the early arrival of a superb print from this round's organiser.

You wont get around me that easily Beaney - conference schmonference

 

[FrankB]

I always thought this conference lark was a cushy deal. You know - roll up, listen to a few bods pontificate while your arse is cosseted by a comfy seat, munchies at regular intervals, then waddle to a hotel complete with sumptuous restaurant, well-stocked bar and hot & cold running chambermaids.

Er, no. Not quite.

Crawl from your pit at 0630 (the 0 standing for "Oh ****, it's early!"). Leave the house at 0700. Join the M62 car-park and sit there for the next hour, the monotony broken only by the tw*t in the 52-plate black Lexus IS200 that goes up the hard-shoulder at 80 with his lights off knowing that the cameras probably won't see him while everyone else sits in the queue at 25, tops (tomorrow I'll have my hands-free kit ready and Greater Manchester Police on speed-dial, you b******! Aye, and the month after that. Merry Christmas! ).

Reach the office car park at 0810. Look at the rain which is coming down in stair-rods and taking the paint off the roof of your car. Realise that you have 30 mins very fast walk to reach the conference and that you have to leave right now. Set off. Despite the brolly, five minutes later your shoes and socks are saturated. Ten minutes after that you have blisters. Fifteen minutes after that you arrive.

Scald your throat with a coffee and hit the lectures. Try and keep up with the coherently-presented best thoughts of some of the world's brightest people in the area of software testing. Realise early on that you are not one of the world's brightest people in the area software testing! Or any other area!

The schedule runs all day with just enough time between sessions to change rooms, (if you're quick) visit the gents and just enough lunchtime to grab a quick bite and buy Compeed plasters (recommended).

1830 leave the conference. 1900 arrive at the office, check voicemail, pick up snailmail. 2030 arrive home, grab dinner, go through and respond to work email, check APUG. 2300, bed, sleep.

This was the third day. I do it again tomorrow.

If I were presented with a hot & cold running chambermaid right now... Well, it'd be a waste! Luckily, my personal bar is well-stocked and is open.

Yes, I know; whinge, whinge, whinge! Actually, despite the above, it's brilliant! I'm learning a ton and paving the way towards learning about ten tons more.

I am, however, cream-crackered!

ZZZZZZZZZzzzzzzzzzzzzzzzzzzzzZZZZZZZZZZZZZZZZZzzzzzzzzzzzzzzzzzzz

 

[Black Dog]

In the words of D.I Regan 'some things about this job are great. And some things STINK. Let's go and have a drink'. Never has the human condition been summed up so eloquently!

 

[FrankB]

"We're the Sweeney, son. And we haven't had any dinner!"

Conference and whinging over. Will try and post a print to my victi... Sorry, my recipient tomorrow!

 

[FrankB]

Print away, first class post.

 

[Bob F.]

I prefer: "Put your trousers on son, you're nicked!"...

 

[Leon]

I prefer: "Put your trousers on son, you're nicked!"...

I take it that's a phrase you've heard often Bob

 

[CarlRadford]

Stunning print from Ian Leake today - love to know a little more about how the print was made and what paper was used?

Carl

 

[Bob F.]

I take it that's a phrase you've heard often Bob

Yes, but I keep telling my Mum it's not funny; it wasn't funny when I was six, and it's even less funny now...

 

[Ian Leake]

Thanks Carl. It's a "Grade 13" Bostick & Sullivan 50/50 pt/pd print on COT 320 paper. I've recently decided to use pt/pd exclusively because since AZO disappeared I've rarely been able to get the final prints I'm looking for with silver papers. After a lot of practice I can now make prints that I'm satisfied with from pt/pd, but I know I have a long way to go still

A scan of the original silver print is in my gallery (there was a url link here which no longer exists).