For Sale Tons of Jobo Gear for sale Tanks, reels and spare parts - all must go!

[CatLABS]

I have a ton of jobo gear for sale almost any tank\reel combination you can think of, plus tons of spare parts and replacement parts for processors of most models.

If there is a part you need and its not on this post, and you have a photo or Jobo part number chances are i have it for sale, so drop me a line and let me know what you need.

Expect a super good price if you are combining stuff.

I can send actual photos of every and any item i have, so PM me or email me directly at krifartida@gmail.com with what you need\want and i can price it out for you or send you photos.
im in the US and i will SHIP WORLDWIDE!

Too much to list all so here is a partial list:

Some is NEW in the box, some is lightly used
Jobo Cpp2 processor with lift

2509n 4X5 reels
2502 reels
1501 reels

3X print tank for 16X20 2850 (with regular or cog lid and beaker)
3X multitank 2 (with regular or cog lid and center core)
2X multitank 5 (with regular or cog lid and center core)
1X multitank 6 (with regular or cog lid and center core)

3X 1530 (with regular or cog lid and center core)
2X 1520 (with regular or cog lid and center core)

600ml bottles
1000ml bottles
2000ml bottles
2500ml bottles

Center cores for all tank sizes
Cog lids for 25XX and 15XX
Rollers, gears, tank clips, paper clip, film hangers, cog lid washers, lift parts, custom jobo screws, CPA2 main drive motor, CPA2 heating element complete circuit, and other CPA\CPE Boards and parts.

and many many more

 

[Gerry M]

EM sent

 

[independent77]

Looking for a tank kit for processing 4x5 sheet film.
Do you have something like this??
Pictures and reply to independent77ATgmailDOTcom

Thanks. Mike.

 

[Sirius Glass]

Prices and condition would be nice.

Putting your location in your profile would be useful to estimate shipping costs and determining custom rates if you are not in the country.

Steve

 

[Paul Green]

Do you have an on/off control board for an atl 1000?

 

[CatLABS]

some more info

OK, i am in the USA, 02130 (boston, local pick up OK!)

alot of the stuff i listed is NEW, some is MINT and some regularly used stuff in fine condition.

there are too many items for me to actually list each and every one condition, but i will try to make a list and post some prices later today.
until then please feel free to contact me directly to my email at krifartidaATgmailDOTcom i answer very fast.

 

[CatLABS]

not at the moment. i only have control parts for CPP CPA machines right now.

 

[lordvader]

PM sent

 

[CatLABS]

pricing for some stuff

with all this stuff consider discounts for multiple items.

Jobo Cpp2 processor with lift 850$ (FOB in MA, USA)

2x 2509n 4X5 reels NEW in box 99$ each

12X 2502 reels MINT MINT as new or barely used - 38$ each (discount for quantity)

8X 1501 reels used but 100% working condition 28$ each (discount for quantity)

1X print tank for 16X20 2850 (same as 2830+2870) with cog lid MINT - 125$

2X print tank for 16X20 2850 (same as 2830+2870) with regular lid MINT 119$

Multitank 2 2521 with regular lid and center core USED good condition, (label removed from tank but scanned print of label provided) 90$

Multitank 2 2523 with cog lid and center core USED good condition, (label removed from tank but scanned print of label provided) 110$


Multitank 6 2563 USED but VGC with center core, With cog lid - 135$ with regular lid 120$

Unitank 1520 with regular lid and center core NEW 69$, MINT 65$ and USED VGC 59$

Unitank 1530 extension module with 04045 extension core NEW 49$ USED VGC 40$

Center cores for all tank sizes:
04045 extension core 25$ 04044 Base core for 2 reels 25$

3X Roller base for CPE CPA CPP with 2X 07067 extension arms and 07007 white rollers - 39$ each NEW or MINT

3X Jobo 07083 tank retainer clips for CPA CPP CPE LIFT - set of 2 - NEW - 22$

5X Orange Cog lid washers set of 2 NEW - 25$

Jobo prints clips 95222 set of 6 NEW - 20$ set of 12 NEW 36$

3X Jobo running rollers with extension arms for all processors (except ATL 1000\1500) set of 2 NEW 25$


please ask about prices for other items.

 

[Sirius Glass]

Thanx!

 

[CatLABS]

Please note - all 1000ml are gone for now, but i will be getting more. i will make a note when i do.

 

[AlbertZeroK]

Please note - all 1000ml are gone for now, but i will be getting more. i will make a note when i do.

price? i am thinking it might be cheaper to buy a bunch of 1 liter ilford fixer than buy jobo bottles??

 

[CatLABS]

1000ml bottles are 89$ for a sixpack.

it might may very well be cheaper. but jobo bottles fit in jobo processors, ilford bottles do not.

 

[AlbertZeroK]

1000ml bottles are 89$ for a sixpack.

it might may very well be cheaper. but jobo bottles fit in jobo processors, ilford bottles do not.

They are the very same size, length, width and height. Same with the 600ml bottles and some illford bottles. The only thing they lack is the little ridge at the top that hooks them in, but if the bottle is full, this is not an issue. I'll grab some photos tonight for you.

 

[CatLABS]

after that all you have to is figure out how to get all the fixer out of them before you contaminate your first and color developers...

 

[SWphoto]

PM sent

 

[willrea]

Happen to have a center core for a 2553?

 

[Bruce Osgood]

Rollers, gears, tank clips, paper clip, film hangers, cog lid washers, lift parts, custom jobo screws, CPA2 main drive motor, CPA2 heating element complete circuit, and other CPA\CPE Boards and parts.

I am looking specifically for a set of rollers that adjust the 1520/30 drum into alignment on the CPE 2 W/lift. They snap on top/over of the existing rollers of the lift which can be slid to proper positioning.