To repair or not repair A12 film backs, that is the question.

OP
OP

What About Bob

Subscriber
Joined
Aug 23, 2019
Messages
643
Location
Northampton, MA.
Format
Analog
The arm part underneath came out, whoopsie. I think that is the part that prevents the shutter from firing when the dark slide is in?
 
OP
OP

What About Bob

Subscriber
Joined
Aug 23, 2019
Messages
643
Location
Northampton, MA.
Format
Analog
I'm taking a break for now. Have other issues it looks like.

The first time I screwed the plate back in, attached the film back to the camera, pulled out the dark slide and tried to fire off a shot. No-go. I unscrewed everything again and checked to see if that armature was in place before putting the plate back on. Now that I got everything screwed back in, the film back will now not go back onto the camera.

I did save the old foil and foam piece. The foam looked actually kind of good for its age. I didn't screw the screws in that tightly like what they were because I will be putting new seals in it soon.

The adventure definitely has begun, lol.
 
OP
OP

What About Bob

Subscriber
Joined
Aug 23, 2019
Messages
643
Location
Northampton, MA.
Format
Analog
I couldn't get the film back attached to the camera so I unscrewed the plate again and was moving the top button slider and things ended up like this.

Update: That black piece is a pita to say the very least. Trying to hold that part in place while keeping the top "12" button aligned just right and kept in, with tape, while moving over that spring metal piece. I am able to get that metal piece reconnected with the top button but that black piece doesn't want to stay put. taking another break. Crash course training this is, lol.
 

Attachments

  • No idea piece.jpg
    162.2 KB · Views: 47
  • I think I'm screwed.jpg
    773.5 KB · Views: 49
Last edited:
OP
OP

What About Bob

Subscriber
Joined
Aug 23, 2019
Messages
643
Location
Northampton, MA.
Format
Analog
Everything is back together but I am not sure about that top thin black piece. It doesn't look like it connected to anywhere. It just rests underneath the metal slider.

The film back, as before, will not attach to the camera and I am not understanding why. When I slide the top button there is emptiness in those two areas where the top metal hooks on the camera side should go right in.

I'll try again tomorrow.
 
Last edited:

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,399
Location
Southern California
Format
Multi Format
Thank you. Meet me in the bar, I am paying for all the drinks this time.
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,174
Location
Delta, BC Canada
Format
Medium Format

Hassasin

Member
Joined
Feb 23, 2023
Messages
1,330
Location
Hassasstan
Format
Multi Format
Hassasin said:
Link is to direct download
Click to expand...

Oops, that was to semi direct, need SCRIBD account (still free or with google account or several others). Let me see if I can find more proper "direct" link.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,399
Location
Southern California
Format
Multi Format
Hassasin said:
THIS will work just fine, and there are more once you get through some clicks.
Click to expand...

IF one wants to save it as a web page but not as a pdf or other usable document.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,399
Location
Southern California
Format
Multi Format
MattKing said:
I shouldn't, but I can't resist.
Old Fashioneds for both of you?
Now to report myself to the Moderators.
Click to expand...

Dry gin Martinis for me. Stirred not shaken. Shaking kills the botanicals, ruining the drink. Never vodka which has no taste, just like James Bond who got it wrong twice. Actually Ian Flemming had it correct in his first book and then proceeded to screw it up in every book since.
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,174
Location
Delta, BC Canada
Format
Medium Format
Sirius Glass said:
IF one wants to save it as a web page but not as a pdf or other usable document.
Click to expand...

With a couple of clicks, I was able to download the pdf.
You have to use their download utility.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,399
Location
Southern California
Format
Multi Format
MattKing said:
With a couple of clicks, I was able to download the pdf.
You have to use their download utility.
Click to expand...

Ah. Live and learn. You can have more than one drink now. I am still paying.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,399
Location
Southern California
Format
Multi Format
Hassasin said:
I downloaded the file without a problem from that link before I posted it.
Click to expand...

You succeeded where I have failed many times before. That problem had been a nuisance for quite awhile. @MattKing showed me the way
 
OP
OP

What About Bob

Subscriber
Joined
Aug 23, 2019
Messages
643
Location
Northampton, MA.
Format
Analog
OP
OP

What About Bob

Subscriber
Joined
Aug 23, 2019
Messages
643
Location
Northampton, MA.
Format
Analog
The film back is ready for new sealing materials. For now I reassembled it until I do this. The back wants to try to connect with the camera but it can't. I can hear faint clicking when trying to attach it to the camera but it just doesn't make it, isn't catching. I am being gentle with it. I compared the film back I have been working on to the other bad back and the holes on top and at the bottom are not obstructed by anything. The plate area is flat so I am confused as to why the mating isn't happening. The other bad back connects to the camera no problem.

Manuals are great. I also wish that there were video demonstrations about things such as this. I am fine with written text and diagrams and I am also a visual person. Sometimes things are easier for me that way with certain things.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…