I've got a couple of ACP200s that I bought and never used, and now I got a bigger print processor so these are never going to get used. Time to go! I tested them both yesterday with plain water in the reservoirs and they seem to work fine - they take about an hour to come up to temperature, the developer pump circulates fine, the drains are clear, the transport mechanism pulls paper through straight, etc.
Both of them have the little exit path clips unscrewed from the body but the clips and screws are all present. I don't really know how that part works as I don't have any pictures of that side of one. One of them is complete with both red drive couplers and the "comb" piece that guarantees they stay put. The other one has one red coupler and one white tube of the right diameter that functions the same way... and no plastic comb, but everything stayed put for the 1+ hour I ran it. That one is also missing the little o-ring that drives the final plastic roller but that can probably be obtained pretty easily from a hardware store or McMaster Carr or somewhere.
These were sold two me with two spare pumps so I'll pass those along too, in case the pumps ever get gummed up.
Here is a scanned version of the manual that came with them:
http://backglass.org/duncan/darkroom/thermaphot_acp200_manual.pdf
I'd like to get $75 for the pair, plus FedEx Ground/Home Delivery shipping which I estimate will be about $50. (If it's less I'll refund the extra. If it's more I'll eat the excess.) US 48 only. If nobody wants both of them then I'll consider selling them separately for $50 each plus shipping. If you're in the Chicago area anywhere, I'd gladly meet up to avoid shipping charges and hassles.
Duncan
Both of them have the little exit path clips unscrewed from the body but the clips and screws are all present. I don't really know how that part works as I don't have any pictures of that side of one. One of them is complete with both red drive couplers and the "comb" piece that guarantees they stay put. The other one has one red coupler and one white tube of the right diameter that functions the same way... and no plastic comb, but everything stayed put for the 1+ hour I ran it. That one is also missing the little o-ring that drives the final plastic roller but that can probably be obtained pretty easily from a hardware store or McMaster Carr or somewhere.
These were sold two me with two spare pumps so I'll pass those along too, in case the pumps ever get gummed up.
Here is a scanned version of the manual that came with them:
http://backglass.org/duncan/darkroom/thermaphot_acp200_manual.pdf
I'd like to get $75 for the pair, plus FedEx Ground/Home Delivery shipping which I estimate will be about $50. (If it's less I'll refund the extra. If it's more I'll eat the excess.) US 48 only. If nobody wants both of them then I'll consider selling them separately for $50 each plus shipping. If you're in the Chicago area anywhere, I'd gladly meet up to avoid shipping charges and hassles.
Duncan
