Just a few other things left kicking around that I'd like to go to other homes:
-a light-proof changing bag, about 20" square. Double zippers, arm holes with tight elastic, the whole shebang. $20+shipping
-a Bogen 3047 head. Been around the block for sure. Older model without the levels. The left/right tilt is a bit worn, but if you crank it down, it'll hold up a Calumet C2 8x10. Also includes a pristine hex plate with a 1/4-20 (standard) screw. $20+shipping
-a beater/project 5x7 back for a Century 4a/8a/10a camera. No groundglass, no groundglass clips, no springs. Do whatever you like with it. $15+shipping
-here's what it looks like:
-a Nikon MD-12 motor drive for the FE. Good user. Not pristine by collector standards, but not even close to beaten or worn. $25+shipping.
-I've also got an Omega DII (older model with the friction lift, not the newer geared lift) that is complete. I'll sell you anything you want off of it for a really reasonable price. I've got the lamphouse, and 2 4x5 condensers, and maybe a 6x6 condenser too. Let me know.
-Same deal with an older Beseler 45MX (the blue one). I've got the lamp house, filter housing, resistrol, red filter, lens boards, all that jazz.
-I've also, somehow, got 2 very nice chassis rails for a geared Omega D2. Just the rails, not the in-between bits or the base. Good teeth on them. Make me an offer.
If, by some change, someone wants a few of these things, shipping will, of course, be combined to save you a few dollars and a lot of headaches. Pictures on request for anything.
-a light-proof changing bag, about 20" square. Double zippers, arm holes with tight elastic, the whole shebang. $20+shipping
-a Bogen 3047 head. Been around the block for sure. Older model without the levels. The left/right tilt is a bit worn, but if you crank it down, it'll hold up a Calumet C2 8x10. Also includes a pristine hex plate with a 1/4-20 (standard) screw. $20+shipping
-a beater/project 5x7 back for a Century 4a/8a/10a camera. No groundglass, no groundglass clips, no springs. Do whatever you like with it. $15+shipping
-here's what it looks like:
-a Nikon MD-12 motor drive for the FE. Good user. Not pristine by collector standards, but not even close to beaten or worn. $25+shipping.
-I've also got an Omega DII (older model with the friction lift, not the newer geared lift) that is complete. I'll sell you anything you want off of it for a really reasonable price. I've got the lamphouse, and 2 4x5 condensers, and maybe a 6x6 condenser too. Let me know.
-Same deal with an older Beseler 45MX (the blue one). I've got the lamp house, filter housing, resistrol, red filter, lens boards, all that jazz.
-I've also, somehow, got 2 very nice chassis rails for a geared Omega D2. Just the rails, not the in-between bits or the base. Good teeth on them. Make me an offer.
If, by some change, someone wants a few of these things, shipping will, of course, be combined to save you a few dollars and a lot of headaches. Pictures on request for anything.
