Tank needed for 4x5 developing?

[F4U]

The 4x5 sheet film hanger tank I designed and posted the stl 3D print file I posted on here has worked VERY well for me in the 6 months since I designed it. And can be printed out on the lowly Ender 3. It's for 4 sheets at the time and uses a minimal amount of chemistry. All you need is some hangers. Far better than trays and commercially marketed tanks. After 6 months of using it, I wouldn't even consider any other method. No streaking, scratching, or bromide drag. Even has a thermometer slot to keep a constant eye on temp. It's also free. If you like it, donate to the site.

 

[Paul Howell]

It expired on 1994. Do I need to compensate for this while shooting and/or developing?
Unfortunately there is only one developing lab where I live which take 2 weeks to deliver and only processes b&w and c41.

There are 3 issues with 30 year old color film. First is fog. Depending on storage, frozen vs refrigerated vs room temp, color film is easily fogged. Second is loss of speed, 30 year old color, best guess is a stop. Second issue is shift in color. Until you shoot a test sheet, with a compensating filter or under hot lights it is difficult to predict. You can send on sheet unexposed to your local lab and have it developed in C41 just see if it is fogged. On the positive side lower speed film like ISO64 tend develop less fog than higher speed films. Color shift, who knows.

 

[Paul Howell]

Thinking about it, what do you intend to do with the 4X5 slides? To make prints you have to scan and print inkjet as there are no direct positive color papers made on the market. Second option to to make an inter-negative, although color films designed as inter negative films are no longer on the market it is possible to use porta 160, that would be expensive, check out the current price for 4X5 color film, here in the U.S 10 sheets is listed at $72 US, and is out of stock at the moment at Freestyle. You could copy with MF or 35mm but what be the purpose if you loss the gain and resolution advantage of 4X5. I do not scan and have little experience with the process, but as you scan you can use PS or the like to correct for any color shift. Last option to build a 4X5 projector. I guess you could use the lens of your 4X5 camera reversed, find a bright enough lamp and fans, then a housing, two sheets of nonrefective glass for a slide holder. Would take some work, one slide at a time, but possible.