Synchro-Compur Repair

Tōrō

H
Tōrō

  • 0
  • 0
  • 8
Signs & fragments

A
Signs & fragments

  • 4
  • 0
  • 57
Summer corn, summer storm

D
Summer corn, summer storm

  • 2
  • 2
  • 58
Horizon, summer rain

D
Horizon, summer rain

  • 0
  • 0
  • 57

Recent Classifieds

Forum statistics

Threads
198,821
Messages
2,781,351
Members
99,717
Latest member
dryicer
Recent bookmarks
1

David A. Goldfarb

Moderator
Moderator
Joined
Sep 7, 2002
Messages
19,974
Location
Honolulu, HI
Format
Large Format
Take a look at the attachment and tell me what's wrong with this picture.

I've worked on Synchro-Compur and similar shutters before, but this one's of more recent vintage. It was about a stop slow on all speeds, so I flushed it out with naphtha, and now it's running much better, but the B & T settings aren't working. I've obviously got a pin that's not engaged or maybe a spring that's come loose, but I can't figure out where it is.

Any suggestions?
 

Attachments

  • Synchro-Compur,105Xenotar.JPG
    Synchro-Compur,105Xenotar.JPG
    117 KB · Views: 617
OP
OP
David A. Goldfarb

David A. Goldfarb

Moderator
Moderator
Joined
Sep 7, 2002
Messages
19,974
Location
Honolulu, HI
Format
Large Format
Okay, looking into this further, I realize that B&T are controlled by the two latches, one hinged right next to the "S" with a hole at the other end and the one just about 3 minutes clockwise from it, hinged closer to the lens opening. Immediately clockwise from the hinge for the first lever near the "S" there is a pin with a spring resting against it, and I think this spring needs to attach to something at its end, but I'm not sure what. Any ideas?
 

Colin Graham

Member
Joined
Sep 5, 2004
Messages
1,264
Format
Plastic Cameras
Not sure if this will help, but here's a few pages on the #1 MX from the compur manual.

Hmm.. on second thought, not sure if it's legal to post these so feel free to delete as needed.
 
Last edited by a moderator:

Curt

Member
Joined
Sep 22, 2005
Messages
4,618
Location
Pacific Nort
Format
Multi Format
I had a similar one fail, I disassembled it and cleaned it up but I couldn't get the aperture blades back in place. It sits in a baggie now. Why are these shutters so difficult to reassemble? I finally got a copal #1 and put the cells in it.
 

Curt

Member
Joined
Sep 22, 2005
Messages
4,618
Location
Pacific Nort
Format
Multi Format
My GRAPHIC Synchro - Compur looks different from yours it's probably a different design and older because the flash connector is the older type of bayonet.
 

patrickjames

Member
Joined
Mar 25, 2005
Messages
742
Format
Multi Format
FWIW I had the same problem with the same shutter and I ended up contributing it to wear after messing around with it for a long time. I have fixed many a complicated mechanical thing in my life but I was stumped by the shutter. I just could not get it to work appropriately. It might be worth it to send it somewhere (like Grimes or Flutot's) or just write it off and get a replacement if those settings are important to you. This may not be a lot of help, but it may save you the aggravation that I experienced.

Good luck David.

Patrick
 
OP
OP
David A. Goldfarb

David A. Goldfarb

Moderator
Moderator
Joined
Sep 7, 2002
Messages
19,974
Location
Honolulu, HI
Format
Large Format
Thanks, the diagrams are particularly helpful. There's one spring I'm not sure about, and this is a hint.

The shutter is otherwise working nicely, though, and it's not a lens that I usually use for long exposures. It's the 105/2.8 Xenotar that's mainly for handheld shots with my 6x9 Technika.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom