In a lot of misclaneous stuff I bought what I thought were elements of a superwide lens. Something similar to a super angulon. one of the elements is 64.14mm in diameter. The other is 80.03mm in diameter and is marked 'made in japan'.
Both elements fit into a copal 0 sized shutter. Neither of them have threads for filters.
I loaded the elements up into a shutter I have and threw it on my 4x5. I figure the combined elements are about 65mm focal length. The center looked sharp enough but the edges seemed soft.
I do have two unmarked ilex superwide angle lenses so I am no stranger to unmarked industrial lenses. But now im leaning more to the idea that these are both rear elements from different lenses.
Any ideas from you folks on APUG?
Both elements fit into a copal 0 sized shutter. Neither of them have threads for filters.
I loaded the elements up into a shutter I have and threw it on my 4x5. I figure the combined elements are about 65mm focal length. The center looked sharp enough but the edges seemed soft.
I do have two unmarked ilex superwide angle lenses so I am no stranger to unmarked industrial lenses. But now im leaning more to the idea that these are both rear elements from different lenses.
Any ideas from you folks on APUG?
