- Joined
- Mar 30, 2005
- Messages
- 882
- Format
- ULarge Format
Possible names for this thread:
1. Never send your wife to the photo store.
2. If your wife goes to the photo store, check she buys what you told her to buy.
3. Just how much can you abuse film and still get a printable image?
4. I'm an idiot!!!!!!!
Here's the deal. On Saturday, my wife went to "the city" for a shopping day with our daughter. She asked if she could pick up anything for me. I was low on fix, so I asked her to pick up two gallons of Ilford Hypam fix. (#1) If the store was out of that, then she was to pick up the other Ilford fix the store carries--I think it is called "rapid fixer" or something like that. Ask Chris at the store, he'll know what I mean.
My wife returned Saturday night with two gallons. She even took then down to my darkroom--along with some frozen lasagna to put in the freezer which shares my man space.
Tonight I was doing some film tests on a new film--a graphic arts film which I hope to use for in-camera work. I developed 6 test negatives, 3 shot at one EI, 3 shot at another . I developed the film for various times to test my EI and development time, put it in the stop and fixed it for the recommended time. It looked strange. Something wasn't right. The base looked white. Was it clearing? I hung it to dry.
I took out another graphic arts film and exposed step wedges to do a BTZS test. When I turned on the lights after processing, same thing--it didn't look right. Okay. the film was listed as having a white base, but that white? No, something ain't right. I looked at the film. It hadn't cleared.
Long story short--my wife picked up Ilford Multigrade (small print "Paper Developer")--not fix. I had mixed it in low light and didn't check the label. (#2) I had developed the film, put it through a water stop bath, and then "fixed" it for 5 minutes in paper developer.
Now for (#3) "Just how much can you abuse film and still get a printable image?" When I finally realized that I am an idiot (#4), I quickly made up some fix from my emergency stash--packets of dry chemicals reserved for those moments when I run out of my standard chemicals. I tossed my BTZS negatives in the garbage, but I fixed the first 6 negatives. Two of them look great. No visible fogging!! Clear film around the edges. I did have to pitch the other four due to fogging, however. Also, I don't know the EI or development time for either of the good negatives. But I am amazed I got anything. The unfixed negatives were subject to my viewing light and the over head room light for up to a half hour.
Oh, well. Live and learn. And I don't think I will mention it to my wife. We've been married 29 years and I'd like to make it to 30.
1. Never send your wife to the photo store.
2. If your wife goes to the photo store, check she buys what you told her to buy.
3. Just how much can you abuse film and still get a printable image?
4. I'm an idiot!!!!!!!
Here's the deal. On Saturday, my wife went to "the city" for a shopping day with our daughter. She asked if she could pick up anything for me. I was low on fix, so I asked her to pick up two gallons of Ilford Hypam fix. (#1) If the store was out of that, then she was to pick up the other Ilford fix the store carries--I think it is called "rapid fixer" or something like that. Ask Chris at the store, he'll know what I mean.
My wife returned Saturday night with two gallons. She even took then down to my darkroom--along with some frozen lasagna to put in the freezer which shares my man space.
Tonight I was doing some film tests on a new film--a graphic arts film which I hope to use for in-camera work. I developed 6 test negatives, 3 shot at one EI, 3 shot at another . I developed the film for various times to test my EI and development time, put it in the stop and fixed it for the recommended time. It looked strange. Something wasn't right. The base looked white. Was it clearing? I hung it to dry.
I took out another graphic arts film and exposed step wedges to do a BTZS test. When I turned on the lights after processing, same thing--it didn't look right. Okay. the film was listed as having a white base, but that white? No, something ain't right. I looked at the film. It hadn't cleared.
Long story short--my wife picked up Ilford Multigrade (small print "Paper Developer")--not fix. I had mixed it in low light and didn't check the label. (#2) I had developed the film, put it through a water stop bath, and then "fixed" it for 5 minutes in paper developer.
Now for (#3) "Just how much can you abuse film and still get a printable image?" When I finally realized that I am an idiot (#4), I quickly made up some fix from my emergency stash--packets of dry chemicals reserved for those moments when I run out of my standard chemicals. I tossed my BTZS negatives in the garbage, but I fixed the first 6 negatives. Two of them look great. No visible fogging!! Clear film around the edges. I did have to pitch the other four due to fogging, however. Also, I don't know the EI or development time for either of the good negatives. But I am amazed I got anything. The unfixed negatives were subject to my viewing light and the over head room light for up to a half hour.
Oh, well. Live and learn. And I don't think I will mention it to my wife. We've been married 29 years and I'd like to make it to 30.





