Anyone have a good (cheap) source for "lens boards" for a D2 enlarger? I already have the lens cone that attaches to the enlarger, but the actual circular part that the lens threads into is missing. I would also need the screws to mount it.
I need 2 of them that have 39mm threads, I believe. eBay seems to be a bit of a crapshoot - they aren't marked with threads, and require me buying another cone, etc.
Anyone have a good (cheap) source for "lens boards" for a D2 enlarger? I already have the lens cone that attaches to the enlarger, but the actual circular part that the lens threads into is missing. I would also need the screws to mount it.
I need 2 of them that have 39mm threads, I believe. eBay seems to be a bit of a crapshoot - they aren't marked with threads, and require me buying another cone, etc.
on the other hand, a lot of Omega stuff is so cheap you can buy extra cones that you don't really need and not be out that much money. That is what I have done in the past. Now I have a nice collection of lens cones. Hmmm...my own coneheads!
I did a DIY here also: a sheet of copper-clad printed circuit board material. The lens flange had to be mounted on a ~1/4" block of AOS so the back of the lens didn't protrude through the back of the lens board.
In a real "pinch" the folks at Steve Grimes can fabricate almost anything you need. As you have no doubt heard, they have a reputation of being costly; but, whatever job they undertake is normally done perfectly.