SOLD over on LFPF
I came across another universal flange that I don't need since it isn't going to fit on my lowly 4x4 lens boards...
The max opening is 100mm and the minimum opening is approx 20mm. The other universal flanges I've had only opened to around 80mm, so this will hold a pretty big lens. The mounting screw holes are approx 4 1/4" on center. From the outer side of the knobs, it is approx 6 1/4". Looks to me like this should fit on a 2D/Deardorff 6x6 board.
Knobs turn and lock down. HOWEVER, the rear black cover plate is loose and comes off. I believe that the screws marked in the 3rd photo need to be replaced or somehow tightened over the plate. All the internal pins and leaves are present.
The last time I tried to fix one of these, I ended up looking for small pieces all over the living room and it took me ages to reassemble it. So, I'm leaving that happy chore to the buyer, who, hopefully, is more coordinated than I am...
If I had the nerve to fix the plate, I'd ask $325 for this thing, but you should benefit from my ineptitude, so how about $250 AS-IS including shipping anywhere in the world that USPS will send Int'l Priority mail? Paypal & USPS money orders ok. Might also consider a trade of some sort for one of these that WOULD fit on a 4x4 board. $$ to APUG if sold here.
If interested, email or PM me. If you post here, I probably will not see it. Thanks, Richard
Last edited by a moderator:
