This is an ingenious "processor" for developing prints up to a size of 8x10"/20x25cm.
Because of the vertical chambers it is extremely chemical- and space-saving.
There are 4 heatable chambers with 900ccm capacity each.
The heating can be adjusted to over 45°C/113F. It keeps the temperature very constant.
Because of the heatability you can produce perfect color prints in the RA4 process.
But with the large number of tanks it is also very well suited for black and white fiber prints.
In addition to the developer bath, the stop bath and the fixing bath, the fourth tank can be filled with a rinsing aid like Ilford Washaid.
Additionally there is an independent watering module.
The condition is extremely good. Everything works as it should and there are no chemical residues.
The power consumption is 2x200W (2 separate water baths between the slots).
It's a 220V device. To run it with 110V you have just to buy a simple step-up transformer.
Price: €350, can be shipped worldwide.
You can contact me also via instagram.
Because of the vertical chambers it is extremely chemical- and space-saving.
There are 4 heatable chambers with 900ccm capacity each.
The heating can be adjusted to over 45°C/113F. It keeps the temperature very constant.
Because of the heatability you can produce perfect color prints in the RA4 process.
But with the large number of tanks it is also very well suited for black and white fiber prints.
In addition to the developer bath, the stop bath and the fixing bath, the fourth tank can be filled with a rinsing aid like Ilford Washaid.
Additionally there is an independent watering module.
The condition is extremely good. Everything works as it should and there are no chemical residues.
The power consumption is 2x200W (2 separate water baths between the slots).
It's a 220V device. To run it with 110V you have just to buy a simple step-up transformer.
Price: €350, can be shipped worldwide.
You can contact me also via instagram.
Last edited:
