Renato Tonelli
Allowing Ads
SOLD.
DURST PRO Enlarger for formats 35mm to 4x5. In excellent working condition. Rock-solid, professional quality and durability. The column is extra wide and super sturdy.
Column + Head with Aristo Cold Light at maximum height: 66 inches. Higher (by approx. 12 inches) with the Condenser Head.
The Enlarger comes with:
DURST PRO Enlarger for formats 35mm to 4x5. In excellent working condition. Rock-solid, professional quality and durability. The column is extra wide and super sturdy.
- I bought this enlarger from an acquaintance in the late 1970's. I immediately converted it to an Aristo Cold Light and added a Zone VI Compensating Enlarging Timer with Probe.
- The enlarger is now attache to a custom-made wall mount, which you may have for the asking.
- A few years ago, the cranking gear gave out and had two custom-made by Glennview in Chicago; I installed one and have the spare.
- The Aristo Cold Light is not the round type, but the rectangular type (Model 4x5). I had a machinist make custom-made base for the Aristo Head: between the Aristo's light source and the Negative Carrier stage, there is a thin slot for the Contrast Filters - works great.
Column + Head with Aristo Cold Light at maximum height: 66 inches. Higher (by approx. 12 inches) with the Condenser Head.
The Enlarger comes with:
- Aristo 4x5 Cold Light Head with V54 Lamp for Variable Contrast papers.
- Aristo Contactor 1200.
- Spare Aristo V54 Lamp + original Aristo Lamp (for graded papers only).
- Durst Camcap Condenser Head with the following Condensers:
- Unicon 50 (for 35mm)
- Unicon 85 (for Medium Format) for some odd reason, I have two of these.
- Camcon 150 (paired) (for Large Format).
- Heat Absorbing Glass (necessary when using the Condenser Head).
- Lensboard (Flat) for Large Format.
- Lensboard (Recessed) for 35mm and Medium Format.
- Durst Camneg Negative Carriers with a custom-made case for them; for the following formats: 35mm, 35mm (filed for full-frame), 645, 66 (x2), 67, 450, 450 Glass + Anti-Newton Glass (provides excellent flatness for any negative, from 35mm to 4x5).
- Original Baseboard. Lenses:
- El-Nikkor 1:5.6 f=80mm (mounted on Lensboard).
- Rodenstock Omegaron 1:4.5 f=135mm (mounted on lens board).
- El-Omegar 1:3.5 f=50mm
- Beslar 1:4.5 f=105mm
- Beseler Head Adapter Kit for attaching a Beseler Head.
- Zone VI Compensating Enlarging Timer with Probe, Foot Switch, Acrylic Stand.
- Durst Labometer (Timer) with Power Supply for use with the Condenser Head or a Color Head.
- Misc. spare hardware.
- Original Manual and Brochure.
- Kodak Polymax Contrast Filter Set.
Last edited: