Sheet film container

[keithwms]

I need a way to stow 5x7 and 8x10 sheet film that has been exposed. I'd like to unload it from film holders in a changing bag and then reload film.

Obviously I'd like something that is opaque and sturdy but won't scratch the emulsion. I thought of making something out of delrin and lining it with fiber paper or something like that.

Perhaps there is a product already on the market that some of you use?

Any ideas?

 

[mjs]

I think that most of us just use old film boxes.

mjs

 

[Richard Wasserman]

Old film boxes work great, or if you want something indestructible, Mike Walker makes film storage boxes of ABS plastic. I have never seen one, but I assume they are the same very high quality as his cameras. They are sold by Bromwell Marketing and I am sure others.

Richard Wasserman

 

[reellis67]

I'll third the film box idea. I use this method myself with very good results. In the beginning I didn't have any film boxes, but I save them now and have accumulated enough to have boxes to hold standard and +/- development sheets as well as color. These work well for sending E-6 film out for development too (just mark them well with your address and be sure to ask for their return). You might be able to buy empties from J and C Photo, an APUG sponsor.

- Randy

 

[wilsonneal]

Regarding obtaining empties, if you're near a lab that does sheet film, they're usually willing to give you an empty film box, especially if you're planning to let them develop your film. I reinforce my old boxes with Gaffers tape.
Neal

 

[keithwms]

Okay, sounds good, I'll try boxes.

 

[Capocheny]

The other option is to go to a lab and ask them for the bags that were used to hold photographic paper in.

I've used them in emergency situations and haven't had any problems.

And, ALL photo labs have lots of these kicking around!

Cheers

 

[Anupam Basu]

I'd put them in the opaque plastic envelopes and then store them in boxes. Freestyle sells extra bags for 25cents a piece.

-A

 

[GeorgesGiralt]

Hi !
As a friend of mine told me, you only need one box.
As you may already take notes about exposition, N+ dev, film type, subjet and the like, you have ordered and numbered sheet of paper (or entries in a notebook) so the trick is to store exposed film in the exact same order than your notes.
Returning home, you unpack the film according to the porcessing notes et voila !
If you're a bit paranoïd, you can, as I do, double check using the film identification notches to ascertain nobody has messed up your ordered pile of film.

 

[John Bartley]

I need a way to stow 5x7 and 8x10 sheet film that has been exposed. I'd like to unload it from film holders in a changing bag and then reload film.

Obviously I'd like something that is opaque and sturdy but won't scratch the emulsion. I thought of making something out of delrin and lining it with fiber paper or something like that.

Perhaps there is a product already on the market that some of you use?

Any ideas?

I use a pair of black ABS tubes with threaded caps on one end (permanently capped on the other). One holds cut film which is not exposed and the other one holds the exposed film. I've done this for a couple of holiday trips and it works well and it's cheap.

I keep a notebook log of exposures, so I unload in the same order that I took the photos, then develop in reverse order, eliminating the need for N, N+, N- storage. The notebook tells me which negative is next.

cheers