series vi (series 6) step up rings?

eric · Feb 16, 2004

Hi,

Is there such thing as a Series VI (series 6) step up ring? I checked B&H but not sure if these things even exhisted.

eric

ann · Feb 16, 2004

there are all kinds of step up rings. You start with your lens size and then add an adaptor and then a ring that screws into the adaptor. the ring can be any size you wish. I use them on my mf lens so i only need one step of filters with an adaptor for each lens making them the same size. as i remember they are made by Kalt. My dealer has them.

Donald Miller · Feb 16, 2004

The "series" filters are not found much today. Current lenses use the conventional mm designations of sizes. I doubt that you will find a step up ring since this would be an item with limited market potential. If you did find one it would most likely come from a used camera business such as Midwest Photo.

If you do not find one at a used camera store, I would suggest one of two options. The first would be to have SK Grimes make a step up ring. The second would be to use a compendium lens shade/filter system such as the Lee sytem. The first avenue would probably be the less expensive option. Good luck.

juan · Feb 16, 2004

They are for sale all the time on ebay. You just need to be sure of the size that you need and ask the seller questions to be sure you are getting what you want. I use the series filters on my Speed Grahics, so if there's something more specific you are looking for, maybe I can help.
juan

eric · Feb 16, 2004

Thanks for the answer guys. I really haven't seen any Series6->whater_mm step up rings. i have lots of 52-55 and 49-55 but not series stuff to stuff.

Finding it will probably be not worth it. It will be for a Portragon lens that I got for under $10 bucks. Perhaps I'll just tape my 52mm in the front of the lens.

eric

ann · Feb 16, 2004

i left a message with my vendor, as i was checking about something else, to see if they had any in stock or could be ordered. What is the size of the lens and am i too assume you want to go up to a 52 mm filter?

dr bob · Feb 16, 2004

I'm not sure what you need is a true "step-up". I have a couple of Series-6 to 52mm "Adaptor"s. When you begin looking on E--- or whatever, try that nomenclature. A couple of years ago, there were several sources of adaptors to various sizes.

Good hunting, dr bob.

eric · Feb 16, 2004

Ann, Dr. Bob,

Thanks! I think maybe I was looing for step up adapters when I should be searching for anythign that is series vi or series-6. Yah, i want to go to either 52 or 55mm. I have a bunch of filters in 52/55mms

Ed Sukach · Feb 17, 2004

I'd suggest two web sites:

Tiffen: www.tiffen.com/filters.htm

and:

B+W:

http://www.schneideroptics.com/filters/

The B+W address will give you access to the entire B+W Filter handbook in .pdf format. This is a new edition, and I haven't read all of it - but the old issue was a *gem*. A good instruction manual/ in filter application.

ann · Feb 17, 2004

eric;
My vendor has the step rings in stock, except some exotic sizes. I will be glad to send you an email address and you can order them directly. just let me know.

Nicholas Lindan · Aug 19, 2008

eric said:
Series VI step up rings ... Portragon lens

I found the Portragon isn't S VI - which is 44mm - but 45 mm*. I found this out after I found a 44mm -> 52mm step up ring that didn't fit.

I made up the silly mm of difference with some epoxy putty. The adaptation is permanent, but why would I want it to be other.

I have had a lot of fun with this lens http://www.nolindan.com/UsenetStuff/portragon.html

*Actually it may not even be 45mm - as I never got hold of a 45mm adapter - it could be 44.5mm or 1 47/64" for all I know.

series vi (series 6) step up rings?

Advertiser

Privacy & Transparency

Privacy & Transparency