seeking dev times for 35mm tri-x(new) shot at 250 in ID-11

Sean

Admin

Admin

Joined

Aug 29, 2002

Messages

13,080

Location

New Zealand

Format

Multi Format

• Jun 26, 2004

• #1

Having trouble finding this, can anyone help? thanks!

 

clogz

Subscriber

Joined

Dec 28, 2002

Messages

2,383

Location

Rotterdam, T

Format

Multi Format

• Jun 26, 2004

• #2

ID-11 is the same as D76, so try and find info on D76 and TriX. Massive Dev.Chart on www.digitaltruth.com
Good luck
Hans

 

wiseowl

Member

Joined

Sep 14, 2003

Messages

423

Location

S Wales

Format

4x5 Format

• Jun 26, 2004

• #3

Ilford recommend 7:30 for 400 asa in stock ID11. If your rating it at 250 then it's more or less a case of pulling by 1 stop. Kodak's recommendation is for -1 minute per stop. I guess 6 to 6:30 would be a good starting point.

Cheers

Martin

 

gma

Member

Joined

Mar 10, 2004

Messages

788

Location

Texas

Format

Multi Format

• Jun 26, 2004

• #4

You can use Microdol X diluted 1:3 for good grain and good sharpness. Tri-X at 250 is just right for Microdol.

 

fred

Member

Joined

Sep 8, 2002

Messages

362

Location

Belgium

Format

Multi Format

• Jul 20, 2004

• #5

Hello Sean,

I've quit a lot of experience for this combo.
Did some calibrations.
Rated as 250, and depending off course your method, your lightmeter, your objectif and your camera
(first minute every 10 sec and then every 30" in a small tank)
a good starting point is 7' to 7' 30" by 20°C in ID 1+1!

Printed on Ilford MG IV Warmtone will give you fine results.

Fred

 

Last edited by a moderator: Jul 20, 2004

modafoto

Subscriber

Joined

Oct 17, 2003

Messages

2,101

Location

Århus, Denmark

Format

35mm

• Jul 20, 2004

• #6

Sean said:

Having trouble finding this, can anyone help? thanks!

Click to expand...

Massive Dev Chart says 9.5 min. for ISO 200 i ID11 1+1.
I have developed it for 11.5 minutes for 320. So I would try pretty much in between:

@ISO 250 and develop for 10.5 min. in ID11 1+1


Greetings Morten

 

fred

Member

Joined

Sep 8, 2002

Messages

362

Location

Belgium

Format

Multi Format

• Jul 20, 2004

• #7

http://www.kodak.com/global/en/professional/support/techPubs/f4017/f4017.jhtml#large-tank%20processing%20(1/2-%20to%203%201/2-gallon%20tank)—rolls%20and%20sheets


Dear Morten, Dear Sean,
Kodak is talking about 9' 3/4 small tank and 11' large tank. For D76, at 400 ISO

Here with a modern 50mm 1.8 lens, in 400 ml solution (200ml ID+200ml H2O), with the film pre-soaked, in a Paterson tank, every 30" the calibration gave good results with 7'30"" to 8' minutes, off course film rated at 250.
I can give you to-morrow the density figures, if you want.

I'm looking forward for your further findings.

fred

 

Last edited by a moderator: Jul 20, 2004