Seal parts?

[darinb]

I just sold my Seal 210 here on APUG and it arrived damaged--just one day with UPS!

So far we know that the cord has been cut or torn apart (kind of a puzzle) and the bolt that forms part of the pressure adjustment knob has snapped. There maybe be other damage internally--we cannot check yet due to the power cord issue.

Is there a source for parts? I could not find a Seal website--any pointers?

--Darin

www.darinboville.com

 

[thedarkroomstudios]

Seal-Hunt Tech Phone 888.240.6021
Very good warranty Dept which may lead yo uto parts sales
Warranty Dept
615 Progress Way
Sun Prairie, WI 53590

Part #' you probably need:
Pressure Adjustment Kit 6299032
Power cord can be bought from your local Ace Hardware - look for replacement A/C cords... important to get wire rated for at least 1350 watts. Wiring diagram attached.

 

[Konical]

Good Morning,

Any chance of getting an e-mail address??

Konical

 

[thedarkroomstudios]

Boy... now you've made me WORK!!! Grrrrr.... Okay. I'm over it. I finally found the link I was looking for which prolly would have been more useful the 1st time around anyway.

Dead Link Removed

For outside of US dump the tail-end and pick your country from the globe.

 

[msage]

Thank you!!! I have been searching for a source of parts and could never find any info.
Michael

 

[darinb]

Brad,

You are amazing. A few calls later here is additonal info:

The pressure kit is $55; the direct number to the parts guy is 866-667-4836.

If you are in the Bay Area the repair center (not for parts, for paying to have it fixed) is Image Technologies in Oakland, 510-238-8905.

--Darin

 

[Konical]

Good Evening, Brad,

Thanks much! For years, I've been using a large bolt in place of a missing pin on one side of my press; maybe this would be a good time to replace it with the real thing.

Konical