$220 U.S. dollars via paypal, free shipping to the lower 48 states, other areas adjusted or cost whichever is less.
Some fine scratches in the center of the front element that do not affect image quality.
Recent CLA on the shutter. It is consistent and in tolerance from 1 second through 1/25 second, 2/3 to 1 stop slow from 1/50 to 1/200. (This is a relist as the edit feature FAILED.) The timing delay was adjusted to get the slower speeds correct. The shutter runs no faster at 1/400 with the delay timer removed than it does with the delay mechanism installed.
The test charts were printed at 2880 ppi on white card stock on an Epson Stylus Photo 2200, black ink only. They are mounted on a 20 inch x 30 inch sheet of foam core with double sided tape. The lens/shutter was mounted on a Cambo Legend on a wood tripod. The film plane was 7 feet from the target. Exposure was room light at 1/5 second f5.6 for 210, 3 seconds f12 for the 370.
Some fine scratches in the center of the front element that do not affect image quality.
Recent CLA on the shutter. It is consistent and in tolerance from 1 second through 1/25 second, 2/3 to 1 stop slow from 1/50 to 1/200. (This is a relist as the edit feature FAILED.) The timing delay was adjusted to get the slower speeds correct. The shutter runs no faster at 1/400 with the delay timer removed than it does with the delay mechanism installed.
The test charts were printed at 2880 ppi on white card stock on an Epson Stylus Photo 2200, black ink only. They are mounted on a 20 inch x 30 inch sheet of foam core with double sided tape. The lens/shutter was mounted on a Cambo Legend on a wood tripod. The film plane was 7 feet from the target. Exposure was room light at 1/5 second f5.6 for 210, 3 seconds f12 for the 370.
