Briefly for your information: Most of all these facts, especially who is making which films for Maco/Rollei was already published in 2006 in the german photo magazine "Schwarzweiss", issues 54 and 55.
Dear all,
Thank you very much for your comments!
Just a few thoughts :
First of all : we should be very grateful to both Maco/Rollei and to Fotoimpex/Adox for bringing us B&W films in a variety no longer offered by the larger companies (Kodak, Ilford, Fuji).
MACO/Rollei has always been very clear about the source of their films : For the Maco brand it was EFKE, except for CUBE 400C (Filmotec/OrWo) and UP400p (Ilford HP5). For the Rollei brand it is Filmotec/OrWo (Ortho 25, PAN 25, IR³), Agfaphoto/Leverkusen (Retro 100/400) and Agfa-Gevaert/Belgium (IR400, ATP, RSD, Superpan 200).
Fotoimpex/Adox has also been very clear about the source of their films so far : 25/50/100 CHS is being made by EFKE. CHM 125 and 400 are Ilford FP4/HP5 respectively. Adox anounced recently they will start production in a new plant of their own of ADX 25/100/400 based on Agfa APX 25/100/400-formulas. However, I have never seen a reference in their catalogue to the source of CHM20 (It is generally known to be Agfa Copex Rapid AHU) and to the source of Adox PAN 25 ("more modern dan CHS 25" states their catalogue) and Adox ORT 25. I had heard rumours they were the same as Rollei PAN 25/ORTHO 25 respectively (but much cheaper
. As rumours are worth nothing and as I could not find a serious answer to my questions on any forum, I started this thread on 23 Jan 2008 on APUG, . The translation of Maco's Harthmuth Schroeder's post on APHOG is dated 24 Jan 2008. Anyway, I have not found any comments so far by ADOX/Fotoimpex... It is not really important anyway, I will just try their PAN & ORT 25, but I am always a bit curious when I find a new film...I am also curious what the new Bergger films will be: just rebranded Ilfords or a new (or old) film made by Ilford for Bergger. Wait and see...
Rebranding/relabeling does not make sense imho, except when it is cheaper than the original. Then again it is not always sure that it is exactly the same (older formula of the same product, e.g. FP4/HP5 without the "plus"; or the same product with higher or lower quality control, e.g. EFKE used to produce for MACO using higher quality controlls). What we know now is that Adox PAN25/ORT25 is the same or at least similar to Rollei PAN 25/ORTHO 25...
Furthermore "made by" can mean a lot of things : the base (PET, Triacetate,...) can be made by company A, the emulsion and coating by company B, cutting & packaging by company C....
Jacques
