Richeson 9010 watercolor brush

[gr82bart]

So in the alt exchange thread, I was told to get this brush which I will, but I did a little research.

What size brush do you you guys use for spreading the senitizer?

I see this brush is a typical one with synthetic materials for the bristles versus camel hair - that is the hair from a camel - I kid you not - suppose to be the finest material for brushes - who knew? I gather the synthetic material is better than an 'organic' one?

Thanks, Art.

 

[Kerik]

Depends on what size you print. For smaller than 8x10, I prefer the 2". For 8x10 or 11x14, 3 inch. And for anything larger, 4 inch. I know some people use the 2" for 8x10, but I think the 3 inch is better/easier.

 

[Jeremy]

It doesn't soak up as much sensitizer (read eats less $$$) than other brushes. There are many people who have tried many other brushes, but we all just keep coming back to these so I would say go for it.

I have a 1.5 or 2" brush for my 3x4 - 8x10 prints and also purchased a 3" brush for 8x10+ (11x14 - 12x18). I may actually pick up a smaller 1" brush for my 3x4 prints, but the brush I have seems to be doing okay...

 

[photomc]

Art, I use a 1 inch for 4x5, and a 2 inch for 5x7 and 8x10 (both 9010's). There are others here that can explain why, but my thoughts are the synthetic brush helps to "push" the substrate around while coating rather than the substrate getting absorbed by the bristles like it might with a camel hair. All I know for sure is that people much better than I recommend the Richeson and it was much easier to coat than with a puddle pusher.

lol Jeremy, we must have posted at the same time....Kerik, could to know about the 3 inch for 8x10, will have to get one and give it a go....I like easier/better

 

[scootermm]

just to reiterate... I use a 2" for 5x7 and 8x10 (and the occasional 4x5) and a 4" for 7x17s. I just recently got the 4" one and the ease of coating the larger area is VERY noticeable. I always felt really rushed when coating a 7x17 area with the 2" one. Not so with the 4" brush. it was a shock the cost, reminded me of the times I bought a really nice tube of acrylic paint. like then, its worth the money.

 

[David A. Goldfarb]

When you're in the city, Art, stop in at Pearl Paint on Canal St. They carry Richeson brushes (the Richeson Miniature Series are the best spotting brushes, by the way), and I really like to be able to pick them in a store, rather than ordering by mail.

 

[donbga]

When you're in the city, Art, stop in at Pearl Paint on Canal St. They carry Richeson brushes (the Richeson Miniature Series are the best spotting brushes, by the way), and I really like to be able to pick them in a store, rather than ordering by mail.

FWIW, I've never seen the 9010 brush sold at Pearl Paint, at least here in Atlanta. Jerry's Art-O-Rama has the best price that I've seen.

Don Bryant

 

[David A. Goldfarb]

The Pearl Paint in New York is really big. Well stocked, but sometimes inconsistently, so they often have a huge selection of things, like a whole room of just brushes, but if you need one specific thing, and it's about the end of semester when art students have their projects due, you might not find it. Jerry's prices are often better online, but I still like to pick brushes in person.

 

[mikeryan]

I agree 100% with David.....I must see a brush and hold it in my hands before I'll even consider it. I drove to the Pearl in Chicago to do so. Every brush is unique in its own way and I look for different qualities when I make my selection. I know I'm anal but this is my ballpark here and I know a good brush and the Richeson is just magnificent. What they have done with that brush is something I thought impossible. My only complaint is the paint they use on the handle is garbage. Don't care though as it performs so well I overlook that. 2" is perfect for me for 5/7 and 3" is a charm on 8/10.

It's funny how (and no disrespect here whatsoever) we can dump literally thousands into equipment and when it comes to the tool that is going to bring it all home we pause and shudder to pull the trigger on it because it's "so expensive."

 

[glbeas]

FWIW, I've never seen the 9010 brush sold at Pearl Paint, at least here in Atlanta. Jerry's Art-O-Rama has the best price that I've seen.

Don Bryant

Is Jerrys local to Atlanta? My searches just came up with a dead link to the catalog.

 

[Joe Lipka]

Jerry's Artarama is not local to Atlanta. They have multiple locations. Here is the link I use:

http://www.jerrysartarama.com/

The catalog store is located in Raleigh, NC. I ordered on line and was able to make a local pick up, thus saving a bunch on freight. Made those brushes really inexpensive.

 

[photomc]

Found Jerry's last night, just for anyone that might be in or near New Orleans there is also Dead Link Removed with very good prices - $25 for a 2 inch, $54 for a 3 inch. When I ordered mine last year, they were actually drop shipped from Richeson. Guess if I knew what to look for in a brush, I might want to hold one too.

Hey Mike (good to see you BTW), have noticed the same problem with the paint...do most of you remove the paint or seal it some how?

 

[clay]

Rubberized tool dip stuff you find in the hardware store will seal up the brush just fine. I dip it all the way just past where the metal ferrule touches the wood. You can get some pretty racy colors too: red,blue and of course, the artiste's choice, black

 

[sanking]

I tried the rubberized tool dip but it also eventually peeled off, so I stripped the handle of all of the paint, sanded it thoroughly and allowed it to dry, then re-painted with a spray-on coat of black epoxy paint.

Sandy

Rubberized tool dip stuff you find in the hardware store will seal up the brush just fine. I dip it all the way just past where the metal ferrule touches the wood. You can get some pretty racy colors too: red,blue and of course, the artiste's choice, black

 

[photomc]

Thanks guys...had not thought about the tool dip. Figured that Iwould just sand it off.