I fortunately have a vacuum chamber.
About once a year I get a phone call from friends saying that they have dropped something electronic, usually their phone into water, can they come around and put it into my vacuum chamber.
I have once, placed a Nikon F2 in the vacuum chamber after it had been submerged for about 1/2 an hour in a river.
After about 20 minutes we assumed all water had gone, the camera was then sent away for a service, it has worked ever since.
If you know of anyone who has access to a vacuum chamber, this will eradicate water the easiest and best way possible.
In case you don't know, water boils off in a vacuum.
In fact, water in my vacuum chamber will start boiling at 2 degrees C, which effectively means I have boiling cold water!
Mick.
I wonder how long a Shop-Vac would run pulling a partial vacuum before the motor burns out? You could make a chamber for things like this if the motor would last. Might take much more time to dry, but you should be able to pull a decent amount of vacuum with one and a good sealed container. Kep the vac running for a couple of hours and it should works almost as well as a real vacuum chamber (for this task).
I wonder how long a Shop-Vac would run pulling a partial vacuum before the motor burns out? You could make a chamber for things like this if the motor would last. Might take much more time to dry, but you should be able to pull a decent amount of vacuum with one and a good sealed container. Kep the vac running for a couple of hours and it should works almost as well as a real vacuum chamber (for this task).
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?