RB67 lens shade dimensions

philsweeney · Sep 3, 2008

I'd like to ask any RB67 owners who have the lens shade to measure the dimensions of the shade especially as used for the 50mm and 90mm lenses. I made an adapter to use my series IX filters but need to construct a shade also. Length from the lens and opening dimension should be fine.

Andy38 · Sep 4, 2008

The 50mm shade is not screwed , but I put mine firmly fixed around the barrel .
The length from the lens : about 26mm ; the width (it's a square) : about 210mm .

I haven't a 90mm lense shade ; I use the 127-250 for the 90mm lens and it's OK ; this one is screwed and circular .
The lenght from the lens : about 50mm ; the internal diameter (maxi) : about 105mm .

NormanV · Sep 4, 2008

50mm lens hood 210mm square!!!!!
It is actually 110mm square.

Andy38 · Sep 5, 2008

NormanV said:
50mm lens hood 210mm square!!!!!
It is actually 110mm square.

oh , yes , I am wrong ! I am sorry .
Thank you for the correction .
Mine is 117mm square .

philsweeney · Sep 5, 2008

Thanks, for taking the time to make the measurements. Is the bellows hood square or rectangler? and anyone have those dimensions?

paul ron · Sep 5, 2008

I have a few bellows shades in my closet if you are interested in buying one very cheap? It has the Corkin filter slots n another place to put specail effects screens up front.

philsweeney · Sep 6, 2008

thanks Paul but that would not allow me to use my series iX filters

RB67 lens shade dimensions

philsweeney

Andy38

NormanV

Andy38

philsweeney

paul ron

philsweeney

Privacy & Transparency

Privacy & Transparency