RA4 Champion chemistry mixing instructions for working solution

Switching chemicals and decided on the champion bulk chemicals for my RA4 printing. I want to make a 1L working solution for 8x10 prints using 60ml each. The data on these chemicals is super confusing and dont really explain it?
What's the ratio of starter + replinsher + water = 1L

Ive been using kodak stuff and I did 75ml replenisher + 25ml starter + 900ml = 1L can I just use that or are they all different ratios depending on brand ?

It looks like they’re saying 880 mL water + 80 mL replenisher + 40 mL starter = 1 L

This is different.

880mL water, 80mL of the concentrate (the 1 liter bottle of what they sell, not the diluted replenisher), and finally 40mL of starter.

Looks straightforward, please report how this works out.

mshchem said:

This is different.

880mL water, 80mL of the concentrate (the 1 liter bottle of what they sell, not the diluted replenisher), and finally 40mL of starter.

Looks straightforward, please report how this works out.

Click to expand...

It's a little ambiguous because the image showing one how to make the Replenisher doesn't label the concentrate bottle but the other one does

But I think you're correct, I just misinterpreted the images

As a home user, this is all you need. You won't need to do a replenisher.

legstowalkmyself said:

are they all different ratios depending on brand

Click to expand...

Yes.
The ratio you use here is as outlined in the picture you posted and in particular the small bit highlighted above by all three other responders.

I've taken the liberty to update your thread title so it's a little more concrete.

Are you still using Kodak starter? I’m using Kodak single part chemicals as well and curious why you’re switching. Are you staying with Kodak blix?