• Welcome to Photrio!
    Registration is fast and free. Join today to unlock search, see fewer ads, and access all forum features.
    Click here to sign up

Pushing JandC 400 - experience?

High Street

A
High Street

  • 0
  • 0
  • 20
Plato's Philosophy.

A
Plato's Philosophy.

  • 2
  • 2
  • 89

Recent Classifieds

Forum statistics

Threads
201,869
Messages
2,831,465
Members
100,993
Latest member
DIY123
Recent bookmarks
0

Scott Peters

Member
Allowing Ads
Joined
Aug 20, 2005
Messages
359
Location
Scottsdale,
Format
ULarge Format
Ok, if I have a bright scene the film tends to do fine... But, it seems when I try to push it, (low SBR) I struggle getting the contrast up for AZO or Palladium. I tray develop in pyro hd (metol)... by inspection. And, I have left it in the developer a long time to try and raise the highlights and contrast. I rate the film at box speed.

I can push efke 100 just fine.

Do others experience this? Are there other suggestions? Should I increase film speed over 400? Or, is it tough film to push in low SBR? Thanks for the help.
 

Gerald Koch

Member
Allowing Ads
Joined
Dec 14, 2004
Messages
1,662
Format
Multi Format
Contrast is a very complex issue. Trying to compare an ISO 100 film with an ISO 400 film will cause difficulties. Grain size, film speed, and film contrast are related. A high-resolution film will necessarily have small grains, high inherent contrast, and relatively low sensitivity (low speed). Conversely, a high speed film will necessarily have larger grains, lower inherent contrast, and low resolving power. These relationships are dictated by the laws of physics.

You might try a different developer with the fast film. One that inherently produces higher contrast.
 

David A. Goldfarb

Moderator
Moderator
Allowing Ads
Joined
Sep 7, 2002
Messages
20,021
Location
Honolulu, HI
Format
Large Format
You're trying to increase contrast, not push. I've gotten enough contrast for Azo in low contrast situations with Classic 400 rated at EI 160 in ABC pyro 1+1+1+7, I don't have my times handy, but since you're developing by inspection, you should be able to figure them out. Here's an example that prints well on Azo grade 2--

(there was a url link here which no longer exists)

If you can't get enough that way, try intensifying the negative in Kodak Rapid Selenium Toner, 1+3, about 8 minutes, and that should give you about another zone of expansion.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom