Pinhole on std large format lensboards?

[largeformat65]

Anyone know of a source to get ready made pinhole's on standard lensboards such as the Linhof for 4x5 and others for 8x10 cameras?

Thanks!

 

[SMBooth]

SKink pinhole make a unit to fit a copal 0 size hole

 

[Tony Egan]

Hi,
I made my own linhof pinhole boards from stiff matt board. Black on one side, white on the other so I could also write details on the white facing outside. Bought a full set of pinholes from pinhole resource website, traced a linhof board on the matt board and a steel ruler and sharp "stanley" knife did the rest. Works very well.
http://www.pinholeresource.com/inde...e-sets-zone-plates-turrets/pinhole-set-detail

Example below of boards and a shot taken with a Deardorff 8x10 which has a linhof board adapter, but no reason you couldn't make any other size board.
If you are particular about it being a light tight fit you can make a thin packing frame from matt board or foamcore to go behind the pinhole board. I did this initially but tests showed it wasn't necessary.


http://www.pinholeday.org/gallery/2011/index.php?id=571&Country=Australia

 

[Simon Howers]

Try this

http://www.pinholesolutions.co.uk/pinhole_factory.html

Simon

 

[jadphoto]

I ordered one that screws into a Copal 1 from Lenox Laser, they also make them for Copal 0 and plain, to be mounted on a board.

Nice folks to deal with as well.

JD

 

[largeformat65]

Thanks everyone for the tips and info! I appreciate it.

 

[Mike Walker]

Hi Mike Walker here, did you find a Tec board with a pinhole? if not email me as I make them.
mike@walkercameras.com
Regards Mike