PRICE CUT: $350 OBO (Was $475 OBO)
Prefer Pick-up: If you’re willing to pay full shipping and packing by the carrier, I will ship. For pick-up, I’ll be glad to meet you halfway somewhere at reasonable distance. I’m in northern VA.
This is a set of 3 Buff White Lightning Ultra monobloc strobes and accessories from my pro days. I have been hanging on to them, but it’s time they make someone else as happy as they did me. I used them for LF work in studio for portraiture and table-top work, as well as on location for both portraiture and architectural interiors. They pack a wallop, and the built-in slaves are very sensitive, which was great on location. I was a one-man band, the only one who handled them. I’m careful. All equipment is in very good condition. KBX Photographix services them.
The remote control is wired, not radio, but it sure saves a lot of trouble and time, especially if one or more lights are mounted too high to reach the controls. IT runs on a9V battery. It can switch each light and/or modelling light on/off, adjust intensity, and trigger whichever lights are on for a light reading. The standard phone coax that connects them can be extended.
These are spec’d for a bright 250W modelling lamp, very useful for LF work. Modelling lights can be on full, off, or dialed up or down with the strobe’s intensity. On occasion I have even used just the modelling lights.
If you have questions, please send a PM.
Included are:
1 White Lightning Ultra1200 including light baffle, standard reflector (w/ hole for umbrella) and metal travel protector (covers tube and modelling lamp), power and phono-to-PC cables
2 White Lightning Ultra600 including light baffle, standard reflectors and metal travel protectors (cover tube and modelling lamp), power and phono-to-PC cables
1 umbrella wide dish reflector (also good for very-wide bounce)
1 RC-1 Buff 4-light remote controller with 4 color-coded 25-ft. phone cable connectors
1 honeycomb/filter holder (also holds barn door unit)
1 honeycomb (30 degrees?)
1 4-door barn door unit
1 snoot with integral honeycomb
Extra modelling bulbs (only one shown, but I believe I have two others as well)
1 padded transport case
You are welcome also to a light-focusing unit made for them, which can focus a cookie for background or subject. It works surprisingly well, but is only made, though professionally, of cardboard; therefore, the modelling lamp cannot be left on for a long time with this unit mounted.
Prefer Pick-up: If you’re willing to pay full shipping and packing by the carrier, I will ship. For pick-up, I’ll be glad to meet you halfway somewhere at reasonable distance. I’m in northern VA.
This is a set of 3 Buff White Lightning Ultra monobloc strobes and accessories from my pro days. I have been hanging on to them, but it’s time they make someone else as happy as they did me. I used them for LF work in studio for portraiture and table-top work, as well as on location for both portraiture and architectural interiors. They pack a wallop, and the built-in slaves are very sensitive, which was great on location. I was a one-man band, the only one who handled them. I’m careful. All equipment is in very good condition. KBX Photographix services them.
The remote control is wired, not radio, but it sure saves a lot of trouble and time, especially if one or more lights are mounted too high to reach the controls. IT runs on a9V battery. It can switch each light and/or modelling light on/off, adjust intensity, and trigger whichever lights are on for a light reading. The standard phone coax that connects them can be extended.
These are spec’d for a bright 250W modelling lamp, very useful for LF work. Modelling lights can be on full, off, or dialed up or down with the strobe’s intensity. On occasion I have even used just the modelling lights.
If you have questions, please send a PM.
Included are:
1 White Lightning Ultra1200 including light baffle, standard reflector (w/ hole for umbrella) and metal travel protector (covers tube and modelling lamp), power and phono-to-PC cables
2 White Lightning Ultra600 including light baffle, standard reflectors and metal travel protectors (cover tube and modelling lamp), power and phono-to-PC cables
1 umbrella wide dish reflector (also good for very-wide bounce)
1 RC-1 Buff 4-light remote controller with 4 color-coded 25-ft. phone cable connectors
1 honeycomb/filter holder (also holds barn door unit)
1 honeycomb (30 degrees?)
1 4-door barn door unit
1 snoot with integral honeycomb
Extra modelling bulbs (only one shown, but I believe I have two others as well)
1 padded transport case
You are welcome also to a light-focusing unit made for them, which can focus a cookie for background or subject. It works surprisingly well, but is only made, though professionally, of cardboard; therefore, the modelling lamp cannot be left on for a long time with this unit mounted.
Attachments
Last edited:
