I have a partial roll of 70 mm Portra 160 NC in 70mm. The film is late date, 2010 expiration. It has been cold stored/frozen since new. I do have the original can, however, I put it in another can as it has a lot of rust spots. I have tested a section of this film in black-and-white developer, and there was no perceptible base fog.
I weighed the can and also measured the diameter, and according to both measurements there’s about 50-55 feet of film in the can still. That’s enough to make about 3.5 15 foot cartridges or 20 rolls of 120. This film is non-perforated.
Looking to get $125 for the roll, +$10 for shipping, but open to reasonable offers. SOLD!
I weighed the can and also measured the diameter, and according to both measurements there’s about 50-55 feet of film in the can still. That’s enough to make about 3.5 15 foot cartridges or 20 rolls of 120. This film is non-perforated.
Attachments
Last edited:
