Palladium Na2 method

Leaving Kefalonia

H
Leaving Kefalonia

  • 0
  • 0
  • 49
Lightning Strike

A
Lightning Strike

  • 1
  • 2
  • 67
Scales / jommuhtree

D
Scales / jommuhtree

  • 1
  • 2
  • 46
3 Columns

A
3 Columns

  • 7
  • 7
  • 201

Recent Classifieds

Forum statistics

Threads
199,068
Messages
2,785,771
Members
99,794
Latest member
SEADave
Recent bookmarks
0
Joined
Sep 6, 2008
Messages
26
Format
35mm
I've managed to finally get some decent prints using the B&S Ferric Oxalate 1 and 2 solutions, and just got their Na2 Kit. But I need some advice as to a starting point. I'm doing my current prints at 1/3 2/3 ratio both for platinum to palladium and the Ferric Oxalate solutions - for 12 drops of palladium what's a good starting point for how many drops of the Na2 solution? (there's no indication if the Na2 is 5, 10 or 20% concentration)
 

Monophoto

Member
Joined
Aug 27, 2004
Messages
1,689
Location
Saratoga Spr
Format
Multi Format
Normally, the NA2 method uses only Palladium salts. NA2 is actually Sodium Chloroplatinate - it contains platinum - so you generally don't need to use pure platinum. That's good because the NA2 material is expensive, and the process is economically appealing only if it offsets the need for both the Ferric Oxalate No.2 AND platinum.

I use equal quantities of Ferric Oxalate No 1 and palladium - in my case, 6 drops of each per 4x5 print. The contrast ratios that I use are listed in the table.

This table quantifies contrast via contrast ratios. I don't have any way to measure contrast ratio, but I find that the generic "more contrasty" or "less contrasty" combined with trial and error works reasonably well.
 

Attachments

  • Drawing1.jpg
    Drawing1.jpg
    25.7 KB · Views: 266
Last edited by a moderator:

sly

Subscriber
Joined
Nov 12, 2006
Messages
1,675
Location
Nanaimo
Format
Multi Format
If you got the same kit I did you have 20% solution. You need to make other dilutions from your "stock", to give you a range of contrasts.
I mixed 4 parts H2O to 4 parts Na2 for 10%
6 parts H2O to 2 parts Na2 for 5%
7 parts H2O to 1 part Na2 for 2.5%

I've attached a scan of a chart I made for myself from info in Christina Anderson's book "Alternative Processes Condensed".
Hope this gives you a starting point. Post some prints when you have some.
 

Attachments

  • File0001.jpg
    File0001.jpg
    71.1 KB · Views: 220
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom