Steve Goldstein
Subscriber
Is there any practical way for the low-volume home printer to recover platinum and/or palladium from the brush rinse water and from the clearing bath? It seems a shame to flush it down the drain.....
Is there any practical way for the low-volume home printer to recover platinum and/or palladium from the brush rinse water and from the clearing bath? It seems a shame to flush it down the drain.....
I don't think so. We're talking milligrams in fairly large volumes of water contaminated with all sorts of additional compounds. To make matters worse, Pt and Pd may be both present alongside each other and they'll probably be quite difficult to separate to begin with.practical way for the low-volume home printer
I agree. (But I’d love to be able to do this so if any chemists have smart ideas then I’d love to hear them.)I don't think so. We're talking milligrams in fairly large volumes of water contaminated with all sorts of additional compounds. To make matters worse, Pt and Pd may be both present alongside each other and they'll probably be quite difficult to separate to begin with.
Provided you could actually separate out the noble metals, you'd still have to convert them to usable salts to be able to reuse them, and the chemistry involved is typically not something you'd want to do around the house.
Contact the folks at Bostick and Sullivan.
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY: ![]() |