• Welcome to Photrio!
    Registration is fast and free. Join today to unlock search, see fewer ads, and access all forum features.
    Click here to sign up

For Sale Packard Shutter with Primitive Flash Sync on an Ansco 5X7 Lens Board

Trader history for jimgalli (6)

jimgalli

Subscriber
Allowing Ads
Joined
Sep 7, 2002
Messages
4,248
Location
Tonopah Neva
Format
ULarge Format

Would benefit from a clean.


Main value here is the Packard. Buy this for the shutter and throw the board away if you're not an Ansco 5X7 guy.


The 'flash sync' points assy was simply glued onto the board and it has come unglued.


$55.00 + shipping please.
 
Megapixel said:
Jim,
What diameter is the shutter? I need a diameter at least about 3 inches / 75mm.
Click to expand...

This shutter is just 4" wide with 2" opening.
 
darn!! that would fit on old Jake !!!! Does it still work, the air tube looks somewhat "deflated".
 
Definitely needs a new piece of tubing. If you buy it, I'll take it apart and clean it up for you. Jim
 
Mike, there's not too much to go wrong on a packard - and the photos show the blades in both open and closed positions. Clean out any rust and dust and they should be good to go.

Jim's a great person to buy from, by the way. I've been looking wistfully at this shutter listing, but I bought enough old stuff recently to keep my wife watchful of postal deliveries for a while
 
Thanks apkujeong, I have dealt with Jim before with very good results. I'm going to back down on this one, got enough Jake stuff.
 
Lens board is 5 1/4 X 5 1/4" with 1/4" rebate into the camera. Replaced the mummified tubing with some fresh stuff. This afternoon if I get bored I'll go ahead and give this the cleaning it needs. This'll work fine and the flash feature will work too.
 
SOLD!

Thanks All!

​
 
You must log in or register to reply here.
Menu
Log in
Register