Oxidized metol?

jaanus20

Member
Joined
Apr 29, 2025
Messages
7
Location
Estonia
Format
Medium Format
I have bought some metol, and it is not a white powder, like I have seen, but a dark gray, with some clumping. Is the metol oxidized and unusable for use in makig film developer?
 

koraks

Moderator
Moderator
Joined
Nov 29, 2018
Messages
22,754
Location
Europe
Format
Multi Format
Whether it's usable, I couldn't say, but all the metol I've ever bought was either crystal white or very pale tan. Dark gray and clumped doesn't sound good to me. You could try and mix a test batch of developer and compare that to a known-good developer of the same formulation - if you have the materials to do so.
 
OP
OP

jaanus20

Member
Joined
Apr 29, 2025
Messages
7
Location
Estonia
Format
Medium Format
It seems the metol has a lot of impurities in it. When mixing up some developer, it was a dark and murky, but passing that through a coffe filter filtered out the black sediment and came out crystal clear and the negatives I got with the developer seems to be ok. It seems the metol has a lot of impurities in it. When mixing up some developer, it was a dark and murky, but passing that through a coffe filter filtered out the black sediment, and the negatives I got with the developer seems to be ok.
 

retina_restoration

Member
Joined
Jan 28, 2023
Messages
1,144
Location
Wilammette Valley, Oregon
Format
35mm RF
It may work OK, but in the future, I would suggest finding a different source for your chemistry - Metol should not be dark grey, as this indicates contamination or oxidative degradation, or both. It's possible this Metol will eventually be too compromised to work correctly. I wouldn't rely on it in the long term if I were you.
 

Nicholas Lindan

Advertiser
Advertiser
Joined
Sep 2, 2006
Messages
4,243
Location
Cleveland, Ohio
Format
Multi Format
jaanus20 said:
It seems the metol has a lot of impurities in it. When mixing up some developer, it was a dark and murky, but passing that through a coffe filter filtered out the black sediment and came out crystal clear...
Click to expand...
That is passing weird. Sounds like metol cut with dirt. If the filtrate is clear then you should be good to go. Assuming, of course, that the substance in question is really metol. Oxidized metol is a purple-brown color and smells bad - but it will often still develop film, kinda. I have never experienced it throwing sediment. It will be interesting to see the results of the dichromate test.

I think the assay above is for a ~2% w/v solution of dichromate.
 
Last edited:
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…