Omega View Replacement Bellows?
-
A
- Thread starter ToddB
- Start date
Recent Classifieds
-
Want to Buy For parts/broken nikon bodies and lenses
- Started by Gram Nylén
-
For Sale FS: Beseler Printmaker 35 condenser head, Beseler 50mm lens and other parts
- Started by dirkfletcher
-
Sold FS: (broken) Horseman 6x12 Back
- Started by dirkfletcher
-
For Sale FS: Tamron 150mm f/6.3 Lens
- Started by B.S.Kumar
-
Sold SOLD!
- Started by B.S.Kumar
Forum statistics
Astrosmith22 always carries a lot of Toyo gear, and I'd definitely recommend him. Last thing I bought arrived barely 2 days after I paid, express from Japan.
Keep in mind that the only difference between 45D and 45G bellows is that the 45G bellows are removable, they have bits on each end that click into the same size opening as their lensboards.
Take that bit of plastic off each end, and the screw holes that are left line up exactly with the 45D (I know becaues I've got botha 45D and 45G, wanna buy my 45D?). I daresay you could even re-sell those end-bits if you're never going to buy a 45G.
Then you can glue the bellows to the standard like it was originally if you want (when removing the old bellows, don't bust the screws when you take them out, be gentle and pry carefully with a screwdriver to get them off).
Keep in mind that the only difference between 45D and 45G bellows is that the 45G bellows are removable, they have bits on each end that click into the same size opening as their lensboards.
Take that bit of plastic off each end, and the screw holes that are left line up exactly with the 45D (I know becaues I've got botha 45D and 45G, wanna buy my 45D?). I daresay you could even re-sell those end-bits if you're never going to buy a 45G.
Then you can glue the bellows to the standard like it was originally if you want (when removing the old bellows, don't bust the screws when you take them out, be gentle and pry carefully with a screwdriver to get them off).
Until you procure a new bellows, just swaddle the camera with a darkcloth.
(This will buy you decades of use)
$93 shipped. No reason to look anywhere else. Rudy does a nice job.
http://www.ebay.com/itm/New-Hand-Ma...880?pt=LH_DefaultDomain_0&hash=item3f131c71c0
http://www.ebay.com/itm/New-Hand-Ma...880?pt=LH_DefaultDomain_0&hash=item3f131c71c0
- Joined
- Jul 10, 2012
- Messages
- 1,134
- Format
- Medium Format
Yhea.. I used gaffer tape on all the corners. No more pin holes. Thanks guys for the advice. When I'm shooting ,I'll drop over the dark cloth before exposing film to make sure. I light tested it with 250 LUMS flashlight. Nothing showing.
Todd
Todd
I've had 3 sets from Rudy and I agree, he does a great job.
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |