THardy
Member
- Joined
- Dec 20, 2004
- Messages
- 50
- Format
- Multi Format
Hi, I just got a D5500. After assembly I turned it on....the fan ran and the controller came to life. I noticed faint light on the baseboard. I then placed the lens board on, after that no light.
I removed the lamp and looked at it. The filament is not separated like when the bulbs burn out in my Durst M670.
I did order some new lamps.
Is there anything else which may be going on? (other than a shot lamp)
Thanks
I removed the lamp and looked at it. The filament is not separated like when the bulbs burn out in my Durst M670.
I did order some new lamps.
Is there anything else which may be going on? (other than a shot lamp)
Thanks