Want to Buy Omega C700 6x7 (or 6x6) Negative Carrier

[wallrat]

I'm looking for a 6x7 negative carrier for the Omega C700. I would consider a 6x6 as well and go to town on it with the Dremel The 6x6 is also the same carrier that works on the B-66, B22, B600, and Concept Six Models so any of those will work.

I'm also interested in 2 of the heat absorbing glass inserts.

Feel free to email me for a faster response: billp <at> billpratt <dot> net

Thanks,
-Bill

 

🛡️ Classifieds Safety Reminder: Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.

Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.

[fotch]

I have some parts for a C-67 enlarger that may fit. A previous ad from a year or so listed the following items. Some may be gone however, if any of the items are of interest I will check to see if I still have them.

421-017 Lens Disc - 39mm hole for B-22, B-66, and C-67 enlargers
423-219 35mm Full Frame Negative Carrier
423-224 2¼"x2¾" (6x7cm) Negative Carrier
473-124 Heat Absorbing Glass for condenser lamphouse
472-053 Standard Condenser for condenser lamphouse
472-054 Auxiliary Condenser for 35mm and smaller formats
471-038 Opal Lamp 75w/120v for condenser lamphouse

 

[wallrat]

I have no idea if any of them will fit. I know the part numbers are different but I also know that doesn't mean they won't. I'm interested in the 473-124 (2 of them) if they will fit. The current model is http://www.bhphotovideo.com/c/product/39338-REG/Omega_473121_Heat_Absorbing_Glass_for.html. I would also be interested in the 423-219 and 423-224 if they will fit. They definitely look different but again, I don't know if they will fit. http://www.bhphotovideo.com/c/product/39563-REG/Omega_423127_6x7cm_2_25_x_2_75.html is what the negative carriers look like. Let me do a bit of research to see what I can find out about cross-comaptibility. I'll email omega.

 

[fotch]

I could not find the carriers, must of already already sent to someone. What I have left is sets of 3" & 4 inch condensers, heat shield glass and holder. Photos of the enlarger and parts attached. Note! Middle photo, only the condensers are available.

 

[wallrat]

I'll find out on the heat glass and negative carriers. The condensors are much larger than the C700. I also have a couple of D series, but since I'm moving I'm using the C700's until I get settled and set up my darkroom again.
Thanks,
-Bill