Omega B22 Diffuser Material for Filter Holder

Recent Classifieds

Forum statistics

Threads
199,651
Messages
2,794,701
Members
99,980
Latest member
papapaya777
Recent bookmarks
0

5stringdeath

Member
Joined
Feb 10, 2010
Messages
600
Location
St. Louis
Format
35mm
Wondering what material might be good for the filter tray in my B22 for a diffuser stage. I'm doing this mostly to lengthen my exposure times as I'm finding them too short when doing 35mm with my 50mm lens. I do realize I can just remove the 35mm condensor and print with an 80mm, which lengthens time but also means an increase in column height .....

Anyhow I have a great local glass shop which could cut me a piece, but I'm not sure how thick it should be? Or are there some "around the house" materials that might work? Obviously I don't want anything to melt/burn so my first thougth was glass.

I use under-lens MC filters for contrast, thus the filter tray is just sitting empty and seems like a perfect candidate for a diffuser.

This is kind of a stop-gap until I find a cold light and/or Chromega B head
 

Bob-D659

Member
Joined
Feb 10, 2008
Messages
1,273
Location
Winnipeg, Ca
Format
Multi Format
Just use the 80mm condenser with the 50mm lens, no column height adjustment required, or you could always buy a lower wattage bulb.
 
OP
OP
5stringdeath

5stringdeath

Member
Joined
Feb 10, 2010
Messages
600
Location
St. Louis
Format
35mm
Just use the 80mm condenser with the 50mm lens, no column height adjustment required, or you could always buy a lower wattage bulb.

This will lengthen exposure times? I thought this would shorten the times even more, if I removed the extra condensor for 35mm ..... Guess I'm thinking backwards :D Been awhile since I've used a straight up condensor enlarger.
 

ignatiu5

Subscriber
Joined
Feb 16, 2007
Messages
334
Location
Philadelphia, USA
Format
Medium Format
Neutral density filter.

To do what it seems you want (lengthen exposure times), I did what ic-racer has suggested. I ordered a gel sheet of ND2 from my local photo store, and then cut squares to fit the upper filter tray of my B-22 XL, either singly, or stacked to cut 1, 2, or 3 stops of light. It seems to work well for me, there doesn’t appear to be any heat effects from the lamp, and the below-the-lens tray is free for my VC filters.

Might work for you also.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom