Nikkormat FTN, FT-2 focusing screens...interchangeable?

BradS

Member
Joined
Sep 28, 2004
Messages
8,120
Location
Soulsbyville, California
Format
35mm
Will the (nicer) focusing screen of of a Nikkormat FT2 fit in the Nikkormat FT-N? Are they the same shape and size?

I know that this is an operation that would need to be done by a professional camera repair person.
What I'm asking is....if I took an FT-2 and an FTN to a professional and asked to have the FT-2 screen put into the FTN as part of a complete overhaul, would it fit?

Thanks in Advance.
 
Last edited:

George Mann

Member
Joined
May 14, 2017
Messages
2,860
Location
Denver
Format
35mm
It should fit, and since you are having a qualified technician service it, you could probably fit a brighter one from the next generation as well.

The tech would have to adjust the metering circuit accordingly.
 

E. von Hoegh

Member
Joined
Sep 14, 2011
Messages
6,197
Location
Adirondacks
Format
Multi Format
Adjusting the meter in the FTN involves changing resistors, with a soldering iron.
It might be more practical to just go with the FT2 which iirc takes AgO meter cells.
The FTN was available with a split image screen on special order.
 
OP
OP

BradS

Member
Joined
Sep 28, 2004
Messages
8,120
Location
Soulsbyville, California
Format
35mm
Thanks to both of you. I knew somebody here would know.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…