New Minolta Luminance meters - for cash rich people with very bad GAS

[RobC]

http://www.konicaminolta.eu/en/meas...colour-meters/cs-150-cs-160/introduction.html

Gives readings in Cd/m2

but you can always convert to EV in your head, its just a different set of numbers.

And I can assure you that if you need to ask how much they cost then you won't be buying one.

Oh, and virually flare free (< 1%) for those that worry about those sort of things when they really needn't.

 

[BrianShaw]

Principal Applications

• Measurement of the luminance of CRTs, LED’s, and EL’s.
• Measurement of road and tunnel brightness
• Measurement of rail-system signals
• Measurement of road and airport signals
• Measurement of illumination and outdoor signs
• Measurement of illumination equipment and devices
• Research and measurement testing
• Measurement of device brightness

 

[RobC]

Yeah, cool isn't it. Measures colour and colour difference too.

Nothing stopping you from measuring anything you like if you want to.

The "Principal Applications" listed allow them to charge much higher prices for it. It ain't designed for photographers but that doesn't mean you can't use it for photography. When was the last time you saw a 1deg sopt meter for colour.

 

[Richard S. (rich815)]

Finally. This is what I need to finally take my photography to the next level. At least until that next lens comes along....

Very cool tool though!

 

[benjiboy]

I think I'll keep my powder dry because I doubt if I bought onet it would make me any better a photographer than the meters I already use.

 

[BrianShaw]

It is an engineering and scientific caliber tool; not a photographic tool. I've used a similar piece of equipment and doing the conversion to EV and exposure settings. It did not improve my photography one iota. In fact, it made it worse since I was spending too much time fiddling with measurement and maths instead of the image.

 

[RobC]

Please note the topic title.

 

[BrianShaw]

Noted

 

[RobC]

Now I worked out how to convert the result to Ev on my calculator its a breeze. I rekon there must be an "App" to do it if someone can find it or otherwise write one to convert Cd/m2 to an Ev.

Having said that, all you need is chart which shows Cd/m2 range for each Ev so it would be very quick to look it up.

 

[Chan Tran]

Minolta has been making these meters for many years. I don't think the luminance meter can measure color.

 

[RobC]

you obviously didn't read what's at the link I posted then

 

[Chan Tran]

Where does it say that it can measure color?

 

[RobC]

Sorry, I posted the wrong link. I changed it to correct one which is

http://www.konicaminolta.eu/en/meas...colour-meters/cs-150-cs-160/introduction.html

 

[Mr Bill]

Where does it say that it can measure color?

It doesn't. Obviously the OP is the one who didn't read the link.

[Update: I see that he has now corrected the link, to point to a colorimeter]

 

[RobC]

yes I have the Spotmeter F with its manual too.

 

[Mr Bill]

We had a couple of somewhat similar meters, earlier versions of the "incident style" Minolta colorimeters, in the large photo lab where I put in a lot of time. We mainly used one of them for periodic screening of our color-correction booths, as well as other print viewing areas, including "dust spotting" stations. They were good QC instruments for this sort of thing, able to spot early signs of lamp deterioration or to confirm the situation where someone had mistakenly installed the wrong lamps. If such problems aren't caught quickly, a lot of work may have to be reprinted.

The second meter was a spare, able to act as a referee for the first, or as a backup when the other was out for recertification, etc. The cost of the meters was insignificant in the whole scheme - our daily print output was more than most busy pro photographers would have done in their entire career.

I don't see any real use that an ordinary photographer would have for such an instrument, but plenty of other specialists might.

 

[RobC]

It doesn't. Obviously the OP is the one who didn't read the link.

[Update: I see that he has now corrected the link, to point to a colorimeter]

Yeah, the one that says "Luminance & Colour Meter" which takes 1 degree spot readings

 

[Chan Tran]

If you calculator can have log base 2 (like in excel) then the formula is

EV= log2(L/(K/100))

If only log10 or ln is available then

EV= log(L/(K/100))/log(2)

Where EV is EV for ISO 100, L is luminance measured in cd/m^2, and K is the K factor of the reflective meter which is usually 14 or 12.5

 

[ic-racer]

The 160 is 1/3 degree; nice as I don't know of a photography meter with an acceptance angle that small. Perhaps you have found the modern version of the SEI. However, with an internet search I don't see where one could buy it or it's price.

 

[RobC]

And I can assure you that if you need to ask how much they cost then you won't be buying one.

Well over £2000. I'd get a couple so you have a backup.

and I would be inclined to check its size and weight in the spec page before buying one.

 

[Chan Tran]

Got to save the money to get the Illuminance meter as well.

 

[RobC]

Either the person holding it is a four year old or this thing is a humongous beast of a lightmeter!

http://www.konicaminolta.eu/fileadm...CS-150_CS-160/PDF/cs-150_catalogbflpk_eng.pdf

Still, good for impressing people that know size matters.

 

[DREW WILEY]

I don't see anything about measuring color other than a basic color temp correction. It's not a spectrophotometer. And $3000 won't even buy a toy
one of those, at least in any continuous tone capacity. This is just a fancy light meter.

 

[RobC]

I think you came to the party well after everyone else has left.

 

[DREW WILEY]

I was having my own party. I recently picked up a barely used Pentax digital spotmeter for $200. Timely, since my oldest one is one its last legs, having endured an awful lot of torture in the mountains and deserts. But all of them match readings perfectly. Otherwise, when I want a color temp reading, I just grab my Minolta color temp meter. When I want a luminance meter, just grab my basic Sekonic footcandle meter. No need for some "one man band" gadget.