Moersch EasyLith confusion

[silvercloud2323]

hi,

On the website of Moersch for the EasyLith developer i read this:

Dilution 1+10 to 1+30


Does this mean A or B?

A) 1A + 1B + 30 water
3,3 cl + 3,3 cl 1 Liter water

B) 1 + 30 water
3,3 cl + 1 liter water
(1,65cl A + 1,65cl B) + 1 liter water


Thx

 

[koraks]

On the website of Moersch for the EasyLith developer i read this:

EASYLITH | Wolfgang Moersch Photochemie

www.moersch-photochemie.de

Does this mean A or B?

Doesn't really matter. If it's too strong, mix it weaker. Too weak, mix it stronger. The numbers are really more like a very rough starting point/guideline.

 

[silvercloud2323]

View attachment 374451

EASYLITH | Wolfgang Moersch Photochemie

www.moersch-photochemie.de

Doesn't really matter. If it's too strong, mix it weaker. Too weak, mix it stronger. The numbers are really more like a very rough starting point/guideline.

Will give it a try

 

[koraks]

If you read the documentation released by Moersch on this product, you'll find that when he mentions a dilution of 1+... for a two-part concentrate, this means 0.5+0.5+... (so your option 'B').

 

[Buzz-01]

View attachment 374451

EASYLITH | Wolfgang Moersch Photochemie

www.moersch-photochemie.de

Doesn't really matter. If it's too strong, mix it weaker. Too weak, mix it stronger. The numbers are really more like a very rough starting point/guideline.

This. Don't worry too much, just start and see what works for you. I generally mix something like 1+1+60 or 12ml A + 12ml B + 726ml water to make 750ml. This equates to 1+30 and gives me enough for a comfortable session of about 6 to 8 sheets 8x10" in about 3 to max 4 hours with my most used paper. I heat it up to 35 degrees C to speed up the development but this also will exhaust the developer sooner.
Every paper is different so experimenting is key, but it might get you started!

 

[silvercloud2323]

added some notes from Moersch, that i received buying new bottles of Easylit developer