Minolta A Mount?

[Sergey Ko]

Monster adapter has one

LA-VE2 - Minolta Vectis lenses to Sony E-mount cameras auto focus adap

MonsterAdapter LA-VE2 is an electronic lens adapter to mount Minolta Vectis interchangeable lenses to Sony E-mount cameras with Autofocus enabled. It is an upgraded version of the previous MonsterAdapter LA-VE1, which is only MF capable. Key Features Adapting all 8 Minolta Vectis interchangeable...

www.monsteradapter.com

Yes, I just pay for it on eBay ))
Also permanently looking for Minolta RD-3000, to finish Vectis collection, but the prices are terrible

 

[xkaes]

I don't know who made it, but there is also an adapter to put a-mount lenses (MAXXUM & SONY) on Vectis SLRs. Maybe you already have that -- or don't want it.

 

[Sergey Ko]

I don't know who made it, but there is also an adapter to put a-mount lenses (MAXXUM & SONY) on Vectis SLRs. Maybe you already have that -- or don't want it.

Thank You. Never head, I'll look. But it is left only 3 lens... I want not to sell Sony A900, but now I purchased Monster adapter & need to exchange to some mirrorless Sony E mount camera. May be even croped.

 

[neilt3]

Yes, I just pay for it on eBay ))
Also permanently looking for Minolta RD-3000, to finish Vectis collection, but the prices are terrible

I've got the full set of the Minolta Vectis cameras , lenses and accessories , plus a big stash of film ( not shown ) .
I just need to alter a developing spool so I can start developing it myself .
Development costs for APS is getting silly .
I've also got missing in the picture is the cage that fits around the Vectis S-1 to protect it .
I bought the original Minolta Vectis to Sony E adapter after seeing the manual focus prototype over on SAR and persuaded John to make the initial batch in 2015 .
As soon as the fully autofocus adapter was put on Indiegogo I put my money down for £155 ( £100 less than the current full retain now ) and received by November .
All the Vectis lenses are performing well , though don't all cover full frame , being as though they were made for APS-H .
Currently using them on the Sony a6600 and a7Riv .
Keep looking for the DiMage RD-3000 , they sometimes come up cheap , the ones I have were bought probably ten years ago , with lenses and other kit for less than £50 each .
I've used the Vectis cameras a lot when the weathers been bad with rain where I wouldn't chance other gear . They are fully weather proof .

I don't know who made it, but there is also an adapter to put a-mount lenses (MAXXUM & SONY) on Vectis SLRs. Maybe you already have that -- or don't want it.

There certainly is an adapter .
Minolta made it and it was the only adapter to use any other lens on a Vectis camera .
It's called the Minolta MC-V1 and is as rare as hens teeth !
I've only ever seen two for sale in nearly twenty years , so good luck if you want one !
I bought one years ago for about £100 , It's a simple dumb adapter that just alters the aperture , manual focus only as at that time ( 1996 ) all the A mount cameras were screw driven AF , rather than having SSM motors in the lens .
Even the Xi Zoom lenses were controlled by the screw drive connection .

Here's the Sony 16-50mm f/2.8 SSM lens attached to an all black Minolta Vectis S-1 , the adapter's also handy for fitting fast primes and telephoto lenses to the camera too .

 

[neilt3]

Update, nothing spectacular:

Maxxum 5 xi in good condition - need to hunt for a battery!
with Promatic FTD 5600 dedicated flash

Minolta 35-80 1.4 AF
Minolta 100-200 4.5 AF
Kalimar 34-135 3.5 AF (looks like a Samyang)
All 5-pin design

and instead of the pictured Vivitar Series1, a Star-D 80-205, not Minolta mount, maybe close to a Konica AR?

I never really took to the Xi cameras , though I have the 7xi and 9xi , I didn't like their interface , press this , hold that , hope for the best type controls !
YMMV and you might love the camera .

My first SLR was the Minolta 7000AF that I bout used in the early 90's and it still works well .
My main cameras are the Dynax 7 , an SSM enabled Dynax 9 and standard Dynax 9 , the Dynax 5 , 600si and Maxxum 70 also get occasional use .

Of the lenses you got , the Minolta 100-200mm puts in a good performance , only let down by it's minimum focus distance . But an ideal lens for at the zoo where it's small front element is good for shooting between the cages mesh .

The 35-80mm shutter cap lens ( and the 80-200mm shutter cap lens of the same design ) are a terrible lens , nice idea , but images from them are extremely soft .
I have both FL's and only ever use them like a mild soft focus lens where a slight glow is wanted .
They can be of use with infrared film if that's the desired effect .

No idea about the rest of the gear , but I wouldn't expect too much !

 

[jay moussy]

I seem to agree with the above, at least with superficial exploration, and only the 100-200 is working, ignoring the 35-80,
This is my first exposure to vintage in-lens AFs

 

[Sergey Ko]

I've got the full set of the Minolta Vectis cameras , lenses and accessories , plus a big stash of film ( not shown ) .
I just need to alter a developing spool so I can start developing it myself .
Development costs for APS is getting silly .
I've also got missing in the picture is the cage that fits around the Vectis S-1 to protect it .
I bought the original Minolta Vectis to Sony E adapter after seeing the manual focus prototype over on SAR and persuaded John to make the initial batch in 2015 .
As soon as the fully autofocus adapter was put on Indiegogo I put my money down for £155 ( £100 less than the current full retain now ) and received by November .
All the Vectis lenses are performing well , though don't all cover full frame , being as though they were made for APS-H .
Currently using them on the Sony a6600 and a7Riv .
Keep looking for the DiMage RD-3000 , they sometimes come up cheap , the ones I have were bought probably ten years ago , with lenses and other kit for less than £50 each .
I've used the Vectis cameras a lot when the weathers been bad with rain where I wouldn't chance other gear . They are fully weather proof .
View attachment 326521




There certainly is an adapter .
Minolta made it and it was the only adapter to use any other lens on a Vectis camera .
It's called the Minolta MC-V1 and is as rare as hens teeth !
I've only ever seen two for sale in nearly twenty years , so good luck if you want one !
I bought one years ago for about £100 , It's a simple dumb adapter that just alters the aperture , manual focus only as at that time ( 1996 ) all the A mount cameras were screw driven AF , rather than having SSM motors in the lens .
Even the Xi Zoom lenses were controlled by the screw drive connection .

View attachment 326519

Here's the Sony 16-50mm f/2.8 SSM lens attached to an all black Minolta Vectis S-1 , the adapter's also handy for fitting fast primes and telephoto lenses to the camera too .
View attachment 326523

Fantastic! I am following You
The easiest way to upgrade the tank for processing APS film is to buy the soviet universal tank & cut the separating inserts-tubes 12mm shot (36mm-24mm). This one:

Universal film tank 35mm 16mm 8mm developing processing cine movie vintag ussr | eBay

Find many great new & used options and get the best deals for Universal film tank 35mm 16mm 8mm developing processing cine movie vintag ussr at the best online prices at eBay! Free shipping for many products!

www.ebay.com

I made from double Jobo, because I am using ATL-1500, but was not so easy as with that tank