A while back I received two nice Metz flashes that were included with another purchase (50 AF-1 and 48 AF-1). The flashes have no Auto mode sensor and only are TTL with an Olympus Digital cameras.
The only way to use the flashes with other cameras is Manual mode.
Anyway, I'm setting up a large format project where I will need some flash power, so a couple slaves might be nice.
Turns out, with some internet searching, I discovered some updated firmware for my two flashes which will allow them to function as slaves.
Firmware was found here:
Also, note the ephemeral nature of the internet as the www.metzflash.ca site is already down since this capture last year.
The only way to use the flashes with other cameras is Manual mode.
Anyway, I'm setting up a large format project where I will need some flash power, so a couple slaves might be nice.
Turns out, with some internet searching, I discovered some updated firmware for my two flashes which will allow them to function as slaves.
Firmware was found here:
Also, note the ephemeral nature of the internet as the www.metzflash.ca site is already down since this capture last year.
Last edited: