Magnets for hanging prints for viewing?

[Pasto]

Hi, I'm looking for magnets to hold prints on a magnetic whiteboard that I use for print viewing. These should be strong enough to hold prints up to 24x32 without marking the print surface. GTI Graphics has but they're very expensive (about $150 for 24 magnets). Wondering if anyone has found a less expensive magnet that will do?

Thanks in advance.

 

[bdial]

Check out Lee Valley's rare earth magnets.
They are quite strong, and would hold that size print easily.
Rare Earth magnets

These "magnetic tacks" might work especially well for what you're looking to do. The plain magnets can be hard to grip, so these would be easier to work with;
https://www.leevalley.com/en-ca/sho...ets/fridge/100386-magnetic-tacks?item=50K2508

 

[wiltw]

Hi, I'm looking for magnets to hold prints on a magnetic whiteboard that I use for print viewing. These should be strong enough to hold prints up to 24x32 without marking the print surface. GTI Graphics has but they're very expensive (about $150 for 24 magnets). Wondering if anyone has found a less expensive magnet that will do?

Thanks in advance.

Rubber magnets that come in strips
https://www.amazon.com/NABOWAN-Rubb...9Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

some products have adhesive on one side.

 

[Pasto]

Thanks, for the options!

 

[fgorga]

I use these... https://www.amazon.com/gp/product/B01LVW8945

Two of these easily hold a 16x20 print (on 17x22 paper), the largest I make.

 

[MattKing]

These appear to be similar and more easily obtained in Canada: https://www.amazon.ca/Magnetic-Refr...=1&keywords=pin+magnets&qid=1623633674&sr=8-9

 

[Pasto]

More good options, thanks again.